[mythtv-commits] Ticket #11312: Cannot complete backend setup
MythTV
noreply at mythtv.org
Fri Dec 28 01:16:48 UTC 2012
#11312: Cannot complete backend setup
-----------------------+--------------------------------------
Reporter: ylafont@… | Type: Bug Report - General
Status: new | Priority: minor
Milestone: unknown | Component: MythTV - General
Version: 0.25 | Severity: medium
Keywords: | Ticket locked: 0
-----------------------+--------------------------------------
buntu 12.10, FRODO RC2 – just in case anyone needs this.
I believe I have the machine setup properly however I am not able to
complete the Mythtv backend configuration. In the capture card setup, I
have selected “DVB DTV capture card (v3.x)”, the DVB setup picks up the
card and places “/DEV/DVB/ADAPTER/FRONTEND0” ; and then placed “Auvitek
AU8522 AQM /Subtype: ATSC” in the frontend ID: Field. . However is often
disappears and and then the Frontend ID: changesd to “Could not get card
info cSubtype: Unknow error”
At first i thought I needed the firm where file firmware file dvb-fe-
xc5000-1.6.114.fw as detailed here
http://www.linuxtv.org/wiki/index.ph...WinTV-HVR-950Q
But that did not solve the case,
The Dmesg log has the no errors, is there something I am missing?
au0828: i2c bus registered
[ 4.929333] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 4.929991] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.975438] tveeprom 8-0050: Hauppauge model 72001, rev B3F0, serial#
6933236
[ 4.975442] tveeprom 8-0050: MAC address is 00:0d:fe:69:ca:f4
[ 4.975444] tveeprom 8-0050: tuner model is Xceive XC5000 (idx 150, type
76)
[ 4.975446] tveeprom 8-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom
0x8
[ 4.975448] tveeprom 8-0050: audio processor is AU8522 (idx 44)
[ 4.975450] tveeprom 8-0050: decoder processor is AU8522 (idx 42)
[ 4.975451] tveeprom 8-0050: has no radio, has IR receiver, has no IR
transmitter
[ 4.975453] hauppauge_eeprom: hauppauge eeprom: model=72001
[ 4.977224] au8522 8-0047: creating new instance
[ 4.977227] au8522_decoder creating new instance...
[ 4.981304] tuner 8-0061: Tuner -1 found with type(s) Radio TV.
[ 4.982883] xc5000 8-0061: creating new instance
[ 4.987657] xc5000: Successfully identified at address 0x61
[ 4.987661] xc5000: Firmware has not been loaded previously
[ 4.989765] au8522 8-0047: attaching existing instance
[ 4.997770] xc5000 8-0061: attaching existing instance
[ 5.002511] xc5000: Successfully identified at address 0x61
[ 5.002512] xc5000: Firmware has not been loaded previously
[ 5.002515] DVB: registering new adapter (au082
[ 5.002518] DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB
Frontend)...
[ 5.003631] Registered device AU0828 [Hauppauge HVR950Q]
[ 5.003687] usbcore: registered new interface driver au0828
[ 5.152357] usbcore: registered new interface driver snd-usb-audio
[ 6.150815] e1000e: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 6.150822] e1000e 0000:00:19.0: em1: 10/100 speed: disabling TSO
[ 6.152202] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 8.024108] Bluetooth: RFCOMM TTY layer initialized
[ 8.024115] Bluetooth: RFCOMM socket layer initialized
[ 8.024117] Bluetooth: RFCOMM ver 1.11
also
As i continue to search for clues I stumble on the mythtv-setup log and
has the followin,
Dec 27 19:47:25 PlexOne mythtv-setup[2890]: I CoreContext
schemawizard.cpp:117 (Compare) Current MythTV Schema Version
(DBSchemaVer): 1299
Dec 27 19:48:38 PlexOne mythtv-setup[2890]: E CoreContext cardutil.cpp:414
(ProbeDVBType) FE_GET_INFO ioctl failed
(/dev/dvb/adapter0/frontend0)#012#011#011#011eno: No such device (19)
Dec 27 19:48:38 PlexOne mythtv-setup[2890]: E CoreContext cardutil.cpp:414
(ProbeDVBType) FE_GET_INFO ioctl failed
(/dev/dvb/adapter0/frontend0)#012#011#011#011eno: No such device (19)
Dec 27 19:48:38 PlexOne mythtv-setup[2890]: W CoreContext diseqc.cpp:359
(Load) DiSEqCDevTree: No device tree for cardid 4
Dec 27 19:48:39 PlexOne mythtv-setup[2890]: E CoreContext cardutil.cpp:414
(ProbeDVBType) FE_GET_INFO ioctl failed
(/dev/dvb/adapter0/frontend0)#012#011#011#011eno: No such device (19)
Dec 27 19:48:39 PlexOne mythtv-setup[2890]: E CoreContext cardutil.cpp:414
(ProbeDVBType) FE_GET_INFO ioctl failed
(/dev/dvb/adapter0/frontend0)#012#011#011#011eno: No such device (19)
Dec 27 19:48:39 PlexOne mythtv-setup[2890]: W CoreContext diseqc.cpp:359
(Load) DiSEqCDevTree: No device tree for cardi
--
Ticket URL: <http://code.mythtv.org/trac/ticket/11312>
MythTV <http://code.mythtv.org/trac>
MythTV Media Center
More information about the mythtv-commits
mailing list