[mythtv] mythbackend not starting
Doug Beattie
dbb at linkexplorer.com
Thu Mar 13 08:49:36 EST 2003
Bruce:
In answer to my own post, I just noticed the query failure when trying
to update the DB.
I see:
Query was:
INSERT INTO settings SET value = 'BackendServerIP', data =
'66.1.180.69', hostname = 'linkexplorer.com';
Driver error was:
QMYSQL3: Unable to execute query
Database error was:
Unknown column 'hostname' in 'field list'
DB Error (simpledbstorage update):
I guess I'd better look into the DB fields as when I updated from
0.7 to 0.8 I may not have gotten everything correct.
On Thu, Mar 13, 2003 at 08:43:28AM -0700, Doug Beattie wrote:
> Bruce:
>
> Thanks for the reply.
>
> I tried to alter the general configuration settings.
>
> I was able to change nad have stick the "Master server IP address"
> to my externally viewable address, but when I set the other
> "IP address for my <my system>" address to the same value as that
> of the master, finish out the general configuration, then exit
> and try to run the backend I still get:
> No setting found for this machine's BackendServerIP.
> Please run setup on this machine and modify the first page
> of the general settings.
>
> In fact when I go back into the setup for general items and
> check, the Master IP is the new value I entered, but the IP address
> for my system has reverted back to the 127.0.0.1 value.
>
> I tried just setting this value, going to the next screen in the
> general configuration, then going back to the screen where I set
> the correct value and it had already reverted to the 127.0.0.1
> localhost value.
>
> Any thoughts on why this is not staying set?
>
>
> On Thu, Mar 13, 2003 at 07:08:20AM -0800, Bruce Markey wrote:
> > Doug Beattie wrote:
> > > I have the cvs for mythtv compiled and mythepg works fine, but when
> > > I try to start mythtv I get:
> > > connecting to backend server: localhost:6543
> > > Could not connect to backend server
> > >
> > > If I try to start mythbackend I get:
> > > No setting found for this machine's BackendServerIP.
> > > Please run setup on this machine and modify the first page
> > > of the general settings.
> > >
> > > My general configuration was set up using the basic defaults:
> > > IP address for my system is 127.0.0.1
> > > Port the server runs on: 6543
> > > Port the server shows status on: 6544
> > > Master server IP address: 127.0.0.1
> > > Port the master server runs on: 6543
> >
> > You should replace the IP addresses with the real addresses
> > for the machine(s) involved.
> >
> > > What is the process for getting the backend going so I can run
> > > either the mythfrontend of just mythtv?
> >
> > After you've set the addresses in "setup", start "mythbackend"
> > then start mythfrontend or mythtv.
> >
> > > Did I miss something in the FAQ?
> >
> > Not the FAQ but see:
> >
> > http://www.mythtv.org/docs/mythtv-HOWTO-18.html#ss18.8
> >
> > -- bjm
> >
> >
> > _______________________________________________
> > mythtv-dev mailing list
> > mythtv-dev at snowman.net
> > http://www.snowman.net/mailman/listinfo/mythtv-dev
>
> --
> Doug Beattie
> dbb at linkexplorer.com
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at snowman.net
> http://www.snowman.net/mailman/listinfo/mythtv-dev
--
Doug Beattie
dbb at linkexplorer.com
More information about the mythtv-dev
mailing list