[mythtv] Re: Solution (Re: Help reproducing: Audio mismatch with
mdz at debian.org
Sat Sep 13 14:15:00 EDT 2003
On Sun, Aug 10, 2003 at 11:42:05PM -0400, Matt Zimmerman wrote:
> Thanks to Billy Biggs, I seem to have found at least a workaround for this
> problem. Everything seems to work fine if I specify the option type=2 to
> the tuner module. I never did this before because my tuner type was
> correctly autodetected. Indeed, with this option, exactly the same messages
> are emitted by the driver:
Unfortunately, this workaround has stopped working somewhere between 2.4.19
and 2.4.21 (I upgraded recently). It now behaves just as it did before,
even with tuner type=2.
bttv: driver version 0.7.104 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host
bttv: Bt8xx card found (0).
PCI: Found IRQ 3 for device 00:0d.0
PCI: Sharing IRQ 3 with 00:0d.1
bttv0: Bt878 (rev 17) at 00:0d.0, irq: 3, latency: 64, mmio: 0xcddfe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init 
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=44371, tuner=Philips FM1236 (2), radio=yes
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3435G-B6 +nicam +simple +radio
msp3410: daemon started
i2c-core.o: client [MSP3435G-B6] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
tuner(bttv): type forced to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) [insmod]
tuner: type already set (2)
i2c-core.o: client [Philips NTSC (FI1236,FM1236 and ] registered to adapter [bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
More information about the mythtv-dev