[mythtv] Can't get CVS build to work anymore with PVR350
pmowry at cableaz.com
pmowry at cableaz.com
Tue Dec 28 20:35:32 UTC 2004
I've had the same issue. but without ivtv-fb loaded, I can play back files
using the PVR-350 tv-out using dd just fine. AS soon as ivtv-fb loads and I
try the dd command again, I get the symptoms described by Chris below. The
only mythtv application running is the backend. When I get back in front of
my system I'll try loading ivtv-fb before mythbackend, or remove mythbackend
from my startup scripts to see what happens with no myth applications in
memory at all.
Forgive the post here, I did not see Christopher Delis' e-mail so I could
work with him directly to find a common issue.
Date: Tue, 21 Dec 2004 07:42:36 -0000
From: "John Harvey" <john.p.harvey at btinternet.com>
Subject: RE: [mythtv] Can't get CVS build to work anymore with PVR350
To: "'Development of mythtv'" <mythtv-dev at mythtv.org>
Message-ID: <200412210742.iBL7gbVG001820 at www.mythtv.org>
Content-Type: text/plain; charset="US-ASCII"
Current cvs should work fine with 0.1.9 and also with Chris's latest
drivers. In Chris's driver bundle there is a patch for Mythtv which improves
the performance of the OSD and it "should" work with both 0.1.9 and the latest
drivers as well. This patch is just a performance improvement though and is
not required for myth to work.
> -----Original Message-----
> From: mythtv-dev-bounces at mythtv.org [mailto:mythtv-dev-bounces at mythtv.org]
> On Behalf Of Delis, Christopher
> Sent: 21 December 2004 02:43
> To: mythtv-dev at mythtv.org
> Subject: Re: [mythtv] Can't get CVS build to work anymore with PVR350
> Perhaps, I should rephrase my question :-)
> Is there now a version requirement for ivtv? Is 0.1.9 known to work
> with the newest versions of myth? If not, do I need to use Chris
> On Fri, Dec 17, 2004 at 11:19:53AM -0600, Delis, Christopher wrote:
> > I apologize for cross-posting to the dev list, but I wasn't getting any
> feedback from the users list. I am still having trouble getting
> mythfrontend to play anything using the latest CVS build (as of this
> morning). I haven't changed anything to my setup (same ivtv 0.1.9a
> driver, same Matthias X ivtv_fb driver, etc.). Can someone give me a
> as to where to look? Here is my previous post sent to the user list:
> > Hello All,
> > For the past year or so, I have been able to keep up with CVS builds
> > no problem. Thankfully, each time I perform an upgrade (every month or
> > so), I make backups of everything!
> > My last successful upgrade was Oct. 1st. I realize that a lot of
> > has been going on since then. Has something fundamentally changed in
> > the code that deals with the PVR350?
> > I am using ivtv version 0.1.9a and it (like everything else) has worked
> > fine for over a year now. With the latest CVS build, mythbackend seems
> > to work just fine. It can record shows and livetv perfectly (the .nuv
> > files are correct). However mythfrontend seems to hang when I try to
> > view a recording or livetv. There are no error messages or anything.
> > The TV screen initially shows me which input I'm using (Composite 0)
> > and then turns black.
> > Any ideas? Would it help if I compiled the code with debug information?
> > Like I said, myth isn't crashing or anything; mythfrontend simply
> > play anything.
> > Thanks!
> > --Chris
> > _______________________________________________
> > mythtv-dev mailing list
> > mythtv-dev at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
This mail sent using CableAmerica WebMail (www.cableamerica.com)
More information about the mythtv-dev