[mythtv] HW Setup for NuppelVideoRecorder

[Brett Keating]

Thanks again for the quick response... one more question... can you
recommend an analog capture card that works particularly well with MythTV?
TIA.

----- Original Message ----- 
From: "Isaac Richards" <ijr at po.cwru.edu>
To: "Development of mythtv" <mythtv-dev at mythtv.org>
Sent: Wednesday, September 29, 2004 1:02 PM
Subject: Re: [mythtv] HW Setup for NuppelVideoRecorder


> On Wednesday 29 September 2004 03:35 pm, Brett Keating wrote:
> > I'd like to know what kind of hardware set-up is needed in order to get
the
> > software encoder (the NuppelVideoRecorder) to be used by MythTV.
>
> First off, don't cross-post between lists.
>
> > I currently have a Hauppage PVR-350, and I appear to be forced to accept
> > the hardware-encoded MPEG-2 produced by the card. I would prefer to
receive
> > raw video, audio, VBI, etc. from the card and have that input to MythTV
and
> > encoded by the real-time JPEG encoder.
>
> You can't.
>
> > I am willing to swap out my tuner card for another card, if that is the
> > simplest and/or cheapest solution. However, I am also willing to do a
bit
> > of mucking with the code if it's not too much trouble, to get the
current
> > card to do what I want with MythTV.
>
> The only way to do it is to use an analog capture card.
>
> Isaac
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>