[mythtv] dvb zero length record

[Tj NG]

 > Does this happen all the time then? If it does then I doubt it's the
 > same problem as my problem only happens occasionally as a PMT has to
 > turn up on the old channel before tuning is complete.
 >
 > Do you get the "Timeout Getting PMT" message before those ones?
Yes, finally got one... Is the following log output similiar to yours?
---
2005-05-24 11:26:02.584 DVB#0 DVB SI Table Parser Started
2005-05-24 11:26:02.605 DVB#0 Using DVB card 0, with frontend DST DVB-T.
2005-05-24 11:26:02.585 scheduler: Schedule Change
2005-05-24 11:26:02.632 DVB#0 WARNING - Unsupported hierarchy parameter.
2005-05-24 11:26:03.853 DVB#0 DVB signal 5400 | snr 6200 | ber    0 | 
unc    0
2005-05-24 11:26:03.857 DVB#0 Status: LOCK.
2005-05-24 11:26:03.861 DVB#0 Multiplex Locked
2005-05-24 11:26:10.085 DVB#0 Timeout Getting PMT
2005-05-24 11:26:10.091 DVB#0 ERROR - Tuning for channel #9 failed.
2005-05-24 11:26:10.166 Changing from None to RecordingOnly
2005-05-24 11:26:10.224 DVB#0 Recorder: Card opened successfully (using 
TS mode).
2005-05-24 11:26:11.229 DVB#0 WARNING - No data from card in 1 second.
2005-05-24 11:26:12.235 DVB#0 WARNING - No data from card in 1 second.
.. repeats until recording ends.