[mythtv] DVB-S tuning scan -> no-tables

[Endaf Jones]

About a week ago I lost DVB satellite during a recent SVN update. Everything
was working fine until then.
 I've since cleared my database of all DVB items and started a fresh new
scan of a transport on AMC3 with the following dtv_multiplex entry:
 mplexid 5
sourceid 14
transportid *NULL*
networkid *NULL*
frequency 12110000
inversion a
symbolrate 14025000
fec auto
polarity h
modulation auto
bandwidth a
lp_code_rate auto transmission_mode a
guard_interval auto
visible 0
constellation auto
hierarchy auto
hp_code_rate auto
sistandard dvb
serviceversion 33
updatetimestamp 2005-11-01 15:40:19
 I get a "Timeout Scanning mulitplex #5 -- no-tables"
  Here's the channel,siprase debug:
  2005-11-01 15:41:11.707 SIScan(u): ScanWizardScanner::scan(): type(9)
src(14) transport(5) card(11)
2005-11-01 15:41:11.714 DVB#0 Opening DVB channel
2005-11-01 15:41:11.714 DVB#0 Using DVB card 0, with frontend 'ST STV0299
DVB-S'.
2005-11-01 15:41:12.025 DVB#0 CA: CI handler successfully initialized!
2005-11-01 15:41:12.027 SM(0)::AddFlags: Seen() Match()
Wait(Sig,SNR,BER,UB,)
2005-11-01 15:41:12.027 DVBSM(0)::constructor(): initial flags 0x7400000
2005-11-01 15:41:12.028 DVB#0 CA: CI handler thread running
2005-11-01 15:41:12.028 SIScan(0): Creating SIParser
2005-11-01 15:41:12.029 SIParser: About to do a reset
2005-11-01 15:41:12.029 SIParser: Closing all PIDs
2005-11-01 15:41:12.029 SIParser: Using DelAllPids from SIParser which does
nothing
2005-11-01 15:41:12.029 SIParser: Resetting all Table Handlers
2005-11-01 15:41:12.029 SIParser: SIParser Reset due to channel change
2005-11-01 15:41:12.032 SIParser: Added preferred language eng with priority
1
2005-11-01 15:41:12.032 SIParser: Added preferred language eng with priority
2
2005-11-01 15:41:12.032 DVB#0 DVB SI Table Parser Started
2005-11-01 15:41:12.032 SIScan(0): Connecting up SIParser
2005-11-01 15:41:12.033 SIParser: Starting DVB Section Reader thread
2005-11-01 15:41:12.052 DVB#0 Frequency: 12110000 Symbol Rate: 14025000 Pol:
H/L Inv: Auto
2005-11-01 15:41:12.052 DiSEqC(0): Setting LNB: Tone ON 18V
2005-11-01 15:41:12.074 DVB#0 Old Params: freq(0) type(QPSK)
2005-11-01 15:41:12.074 DVB#0 New Params: freq(12110000) type(QPSK)
2005-11-01 15:41:12.077 dvbchannel.cpp:wait_for_backend: Status:
Signal,Carrier,
2005-11-01 15:41:12.077 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2005-11-01 15:41:12.077 DVB#0 Setting mplexid = 5
2005-11-01 15:41:12.079 SIScan(0): ScanWizardScanner::HandleTuneComplete()
2005-11-01 15:41:12.080 SIScan(0): ScanTransport(5)
2005-11-01 15:41:12.080 SIScan(0): Starting SIScanner
2005-11-01 15:41:12.081 SIScan(0): Adding Multiplex #5
2005-11-01 15:41:12.090 SIScan(0): Tuning to Multiplex #5 mplexid(5)
2005-11-01 15:41:12.090 SIParser: About to do a reset
2005-11-01 15:41:12.090 SIParser: Closing all PIDs
2005-11-01 15:41:13.045 SIParser: Resetting all Table Handlers
2005-11-01 15:41:13.046 SIParser: SIParser Reset due to channel change
2005-11-01 15:41:13.047 DVB#0 Frequency: 12110000 Symbol Rate: 14025000 Pol:
H/L Inv: Auto
2005-11-01 15:41:13.048 DiSEqC(0): Setting LNB: Tone ON 18V
2005-11-01 15:41:13.069 DVB#0 Old Params: freq(1360000) type(QPSK)
2005-11-01 15:41:13.070 DVB#0 New Params: freq(12110000) type(QPSK)
2005-11-01 15:41:13.080 dvbchannel.cpp:wait_for_backend: Status: Signal,
2005-11-01 15:41:13.080 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2005-11-01 15:41:13.080 DVB#0 Setting mplexid = 5
2005-11-01 15:41:13.080 FillPMap(str dvb)
2005-11-01 15:41:13.099 FillPMap(SIS dvb)
2005-11-01 15:41:13.100 SIParser: Requesting PAT
2005-11-01 15:41:13.100 SM(0)::Start: begin
2005-11-01 15:41:13.109 SM(0)::Start: end
2005-11-01 15:41:13.463 DVBSM(0)::UpdateValues: Signal Locked
2005-11-01 15:41:14.058 SIParser: Table[0]->RequirePIDs() == true
2005-11-01 15:41:14.058 SIParser: Adding PID 0x 0 Filter 0x 0 Mask 0xff
Buffer 40960
2005-11-01 15:41:14.058 SIParser: Table[2]->RequirePIDs() == true
2005-11-01 15:41:14.058 SIParser: Adding PID 0x1ffb Filter 0xff Mask 0x 0
Buffer 40960
2005-11-01 15:41:14.059 SIParser: Table[3]->RequirePIDs() == true
2005-11-01 15:41:14.059 SIParser: Adding PID 0x1ffb Filter 0xff Mask 0x 0
Buffer 40960
2005-11-01 15:41:14.059 SIParser: Table[6]->RequirePIDs() == true
2005-11-01 15:41:14.059 SIParser: Adding PID 0x 10 Filter 0x40 Mask 0xff
Buffer 40960
2005-11-01 15:41:14.167 SIParser: PAT Version = 14
2005-11-01 15:41:14.167 SIParser: Tuned to TransportID: 1
2005-11-01 15:41:14.167 SIParser: PMT #3 on PID 0x48
2005-11-01 15:41:14.167 SIParser: PMT #4 on PID 0x64
2005-11-01 15:41:14.167 SIParser: PMT #5 on PID 0x80
2005-11-01 15:41:14.167 SIParser: PMT #6 on PID 0x96
2005-11-01 15:41:14.167 SIParser: Services on this Transport: 3 4 5 6
2005-11-01 15:41:14.167 SIParser: Table[0]->Complete() == true
2005-11-01 15:41:55.113 SIScan(0): Timeout Scanning Multiplex #5 -- no
tables
2005-11-01 15:41:55.113 DVBSM(0)::Stop: begin
2005-11-01 15:41:55.115 SM(0)::Stop: begin
2005-11-01 15:41:55.133 SM(0)::Stop: end
2005-11-01 15:41:55.133 DVBSM(0)::Stop: end
2005-11-01 15:41:55.134 SIScan(0): Stopping SIScanner
2005-11-01 15:41:55.141 SIParser: Stopping DVB Section Reader
2005-11-01 15:41:55.182 SIParser: DVB Section Reader thread stopped
2005-11-01 15:41:55.183 DVBSM(0)::Stop: begin
2005-11-01 15:41:55.184 SM(0)::Stop: begin
2005-11-01 15:41:55.184 SM(0)::Stop: end
2005-11-01 15:41:55.184 DVBSM(0)::Stop: end
2005-11-01 15:41:55.184 SIScan(0): SIScanner Stopped
2005-11-01 15:41:55.184 DVBSM(0)::Stop: begin
2005-11-01 15:41:55.184 SM(0)::Stop: begin
2005-11-01 15:41:55.184 SM(0)::Stop: end
2005-11-01 15:41:55.184 DVBSM(0)::Stop: end
2005-11-01 15:41:55.184 SM(0)::Stop: begin
2005-11-01 15:41:55.184 SM(0)::Stop: end
2005-11-01 15:41:55.184 DVB#0 Closing DVB channel
2005-11-01 15:41:55.185 DVB#0 CA: CiHandler thread stopped
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-dev/attachments/20051101/fabbe0d1/attachment.htm