[mythtv] DVB-EIT scanner causes missed recordings?

[Jonathan Wood]

 > I upgraded to SVN head about a week ago.  Then I started noticing
 > missed recordings.

Hi,

I'm having similar issues with missed recordings that seem to have 
started happening since the reasonably recent changes to the dvb code in 
svn. However in my case I still get the problem with the DVB-EIT scanner 
disabled. It only seems to occur with one particular dvb card and only 
on certain channels (I guess this maybe a dvb driver issue rather than 
myth, however it was working fine up until a few weeks ago). It appears 
to record as normal, however the file is never created and it never 
shows up in the list of available recording. Below is -v record,channel 
of a test recording I did that appeared to record however no file was 
created and doesn't show up in the available recordings. Let me know if 
you need more,

Jon

2005-10-28 16:26:14.955 TVRec(1): ClearFlags(AskAllowRecording,) -> 
RunMainLoop,
2005-10-28 16:26:14.973 TVRec(1): ClearFlags(CancelNextRecording,) -> 
RunMainLoop,
2005-10-28 16:26:15.003 TVRec(1): Changing from None to RecordingOnly
2005-10-28 16:26:15.007 TVRec(1): 
ClearFlags(FrontendReady,CancelNextRecording,) -> RunMainLoop,
2005-10-28 16:26:15.010 TVRec(1): SetFlags(AskAllowRecording,) -> 
RunMainLoop,AskAllowRecording,
2005-10-28 16:26:15.014 TVRec(1): Request: Program(yes) channel() 
input() flags(Recording,)
2005-10-28 16:26:15.018 TVRec(1): ClearFlags(PENDINGACTIONS,) -> 
RunMainLoop,AskAllowRecording,
2005-10-28 16:26:15.023 DVB#0 Opening DVB channel
2005-10-28 16:26:15.026 DVB#0 SetChannelByString(1)
2005-10-28 16:26:15.032 DVB#0 Frequency: 698000000 BW: 8MHz HP: 3/4 LP: 
1/2C: QAM-16 TM: 2K H: None GI: 1/32
2005-10-28 16:26:15.034 DVB#0 Old Params: freq(738000000) type(OFDM)
2005-10-28 16:26:15.038 DVB#0 New Params: freq(698000000) type(OFDM)
2005-10-28 16:26:15.362 dvbchannel.cpp:wait_for_backend: Status: Signal,
2005-10-28 16:26:15.366 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2005-10-28 16:26:15.370 DVB#0 Tuned to frequency for channel 1.
2005-10-28 16:26:15.374 TVRec(1): Starting Signal Monitor
2005-10-28 16:26:15.378 TVRec(1): SetupSignalMonitor(1, 0)
2005-10-28 16:26:15.382 DVB#0 Opening DVB channel
2005-10-28 16:26:15.546 SM(0)::AddFlags: Seen() Match() 
Wait(Sig,SNR,BER,UB,)
2005-10-28 16:26:15.550 DVBSM(0)::constructor(): initial flags 0x7400000
2005-10-28 16:26:15.554 TVRec(1): Signal monitor successfully created
2005-10-28 16:26:15.558 TVRec(1): Setting up table monitoring.
2005-10-28 16:26:15.562 TVRec(1): MPEG program number: 4167
2005-10-28 16:26:15.567 DTVSM(0)::SetProgramNumber(4167):
2005-10-28 16:26:15.570 SM(0)::RemoveFlags: Seen(PMT,) Match(PMT,) Wait()
2005-10-28 16:26:15.574 SM(0)::AddFlags: Seen() Match() Wait(PMT,)
2005-10-28 16:26:15.578 SM(0)::AddFlags: Seen() Match() Wait(PAT,PMT,)
2005-10-28 16:26:15.582 TVRec(1): Successfully set up MPEG table monitoring.
2005-10-28 16:26:15.586 SM(0)::Start: begin
2005-10-28 16:26:15.598 SM(0)::Start: end
2005-10-28 16:26:15.602 TVRec(1): SetFlags(SignalMonitorRunning,) -> 
RunMainLoop,AskAllowRecording,SignalMonitorRunning,
2005-10-28 16:26:15.606 TVRec(1): SetFlags(WaitingForSignal,) -> 
RunMainLoop,AskAllowRecording,WaitingForSignal,SignalMonitorRunning,
2005-10-28 16:26:15.610 TVRec(1): SetFlags(NeedToStartRecorder,) -> 
RunMainLoop,AskAllowRecording,WaitingForSignal,NeedToStartRecorder,SignalMonitorRunning,
2005-10-28 16:26:15.616 Started recording: 1 (BBC ONE) "Fri Oct 28 
16:26:00 2005": channel 5167 on cardid 1, sourceid 1
2005-10-28 16:26:15.623 scheduler: Last message repeated 1 times