[mythtv] Current SVN DVB-S zapping problems (diseqc?)
Lukas Kasprowicz
lukas.kasprowicz at online.de
Mon Aug 28 18:08:37 UTC 2006
Am Montag, 28. August 2006 19:49 schrieb Yeasah Pell:
> Based on this information, and the logs, I'm guessing that either the
> FE_SET_VOLTAGE ioctl or the FE_SET_FRONTEND ioctl are silently failing
> some of the time. I don't remember if you said that it always fails on
> the same set of channels, or if it's random?
It depends on the startchan, that was set for initial tuning. If it fails to
tune from the startchan it does always fail to the channels. The channels may
work with other startchans. I noticed with some revisions, that i was able to
tune to channels where i do not need a working diseqc (low band).
> The line "DiSEqCDevTree: Changing LNB voltage to xxV" in the log is
> immediately before a call to FE_SET_VOLTAGE, and if the ioctl fails, you
> would have seen "DiSEqCDevTree: FE_SET_VOLTAGE failed" in the log right
> after that. Similarly, the line "Tune(): Tuning to xxxkHz" in the log is
> immediately before a call to FE_SET_FRONTEND, and if the ioctl fails,
> you would have seen "Tune(): Setting Frontend tuning parameters failed."
> in the log right after that.
Should this be with current head, too? If not i have to recheck this with
r10132. In current head there was the message Tune(): ... successfull ..
I inserted parts of the logfile in my message from "Mon, 28 Aug 2006 15:44:31
+0200".
> What kind of card do you have? Have you noticed any dvb-related failures
> (i2c especially) in the kernel log (i.e. dmesg)?
I am using 2x Skystar2 there were no messages in kernel logs.
Lukas
More information about the mythtv-dev
mailing list