[mythtv] Framebuffer number query failed
philip
plr20 at bellsouth.net
Sat Jul 28 06:50:12 UTC 2007
Hi,
I just updated my system from FC6 kernel 2.6.20-1.2962.fc6 to
2.6.22.1-24.fc6. I also did a "yum update" to get any updated IVTV
packages from atrpms. After a reboot, I tried to watch previously
recorded programs and received the following error in the mythfrontend
log. Things seem to work if I go back to the 2.6.20 kernel.
Is there anything that I need to update to correct this error?
thanx,
philip
mythfrontend log:
============
2007-07-28 01:37:22.004 TV: Attempting to change from None to WatchingLiveTV
2007-07-28 01:37:22.006 Using protocol version 31
2007-07-28 01:37:24.918 Opening ALSA audio device 'default'.
2007-07-28 01:37:24.967 NVP: Enabling Audio
2007-07-28 01:37:25.042 IVD Error: Framebuffer number query failed.
eno: Bad address (14)
Did you load the ivtv-fb Linux kernel module?
2007-07-28 01:37:25.062 WriteAudio: buffer underrun
2007-07-28 01:37:44.834 TV Error: StartPlayer(): NVP is not playing
after 20000 msec
IVTV packages updated:
==================
ivtv-1.0.1-133.fc6
ivtv-devel-1.0.1-133.fc6
ivtv-firmware-20070217-13.at
ivtv-kmdl-2.6.22.1-24.fc6-1.0.1-133.fc6
alsa-kmdl-2.6.22.1-24.fc6-1.0.14-61.fc6
lirc-kmdl-2.6.22.1-24.fc6-0.8.2-68.fc6
kernel-2.6.22.1-24.fc6
/var/log/messages:
==============
ivtv: ==================== START INIT IVTV ====================
ivtv: version 1.0.0 (2.6.22.1-24.fc6 SMP mod_unload 686 4KSTACKS ) loading
ivtv0: Autodetected Hauppauge card (cx23415 based)
PCI: Found IRQ 10 for device 0000:00:0b.0
PCI: Sharing IRQ 10 with 0000:00:02.7
ivtv0: loaded v4l-cx2341x-enc.fw firmware (3936020912 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (3936020912 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9922122
tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP4448 (idx 27)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4448G-A2 supports radio, mode is autodetect and
autoselect
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (3941347344 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
PCI: Found IRQ 10 for device 0000:00:02.7
PCI: Sharing IRQ 10 with 0000:00:0b.0
ivtv: ==================== END INIT IVTV ====================
intel8x0_measure_ac97_clock: measured 50994 usecs
intel8x0: clocking to 48690
ivtv0-fb: Framebuffer at 0xc9510000, mapped to 0xedb10000, size 1665k
ivtv0-fb: === Validated display mode ===
ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: === Display mode change ===
ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: Running in compatibility mode. Display resize & mode change
disabled
ivtv0-fb: Framebuffer registered on ivtv card id 0
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
# lsmod | grep ivtv
=============
ivtv_fb 17952 1
ivtv 125521 3 ivtv_fb
i2c_algo_bit 10053 3 cx88xx,bttv,ivtv
cx2341x 15557 1 ivtv
tveeprom 19153 3 cx88xx,bttv,ivtv
videodev 30785 5 cx8800,cx88xx,bttv,ivtv
v4l2_common 20801 10
cx8800,cx88xx,bttv,msp3400,saa7127,saa7115,tuner,ivtv,cx2341x,videodev
i2c_core 27841 11
cx88xx,bttv,lirc_i2c,msp3400,saa7127,saa7115,tuner,ivtv,i2c_algo_bit,tveeprom,i2c_sis96x
v4l1_compat 17349 3 bttv,ivtv,videodev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-dev/attachments/20070728/6b928aa2/attachment.htm
More information about the mythtv-dev
mailing list