[mythtv-users] Draft revisions to HowTo section 3.3, second
try
Ben Bucksch
linux.news at bucksch.org
Thu Apr 24 01:15:18 EDT 2003
Ray Olszewski wrote:
> I don't know whether a 5200 RPM drive, or an UDMA33 drive, would
> work or not, and I hesitate to say it would not given my lack of
> presonal knowledge.
I have 2 Seagate 80 GB 5200 disks here happily working on a single IDE
channel. I specifically baught 5200 disks for the reduced heat and
hopefully better reliability.
When I copied a huge directory (18 GB), it took extremely long (1.5
hours?), and I don't know why, yet recording while playback (on another
machine) works relatively well, together with an Athlon 1200 (I have
occasional framedrops at panning cameras, though, not sure why).
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: detected chipset, but driver not compiled in!
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380020A, ATA DISK drive
hdb: ST380020A, ATA DISK drive
hdc: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
# hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: ST380020A
Serial Number: xxxxx
Firmware Revision: xxx
Standards:
Supported: 6 5 4 3
Likely used: 6
Configuration:
Logical max current
cylinders 16383 4047
heads 16 16
sectors/track 63 255
--
CHS current addressable sectors: 16511760
LBA user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0040)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
More information about the mythtv-users
mailing list