[mythtv-users] Channel Changing issue

[Mike Wood]

My apologies Isaac, I totally missed this email in my inbox the first
time around.  This fixed me up perfectly.

btw, MythTV is awesome, thanks for all the hard work!

Mike


On Sat, 2003-04-26 at 17:17, Isaac Richards wrote:
> On Saturday 26 April 2003 05:07 pm, Mike Wood wrote:
> > Interesting, ok, so its probably not the PVR250 or its drivers...which I
> > didn't think it was.  I failed to point out originally, I'm not using
> > the Composite 0 input, I'm using the tuner, so I'm not sure why the
> > error message below is reporting it as composite 0.
> 
> It's set to Composite 0 because that's what you have it set for.
> 
> Set it to use Tuner 0 as the default input for that card in the second step of 
> 'setup' (ie, Capture Cards), make sure that 'Tuner 0' is assigned to a video 
> source in the 4th step of 'setup' (ie, Input Connections), and make sure that 
> the 'Starting channel' value for Tuner 0 is set to a channel that you have, 
> and that both 'External change channel command' and 'Preset tuner to channel' 
> are blank.
> 
> Isaac
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
> http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users
>