[mythtv-users] Others experience with LIRC and Atisys200L

[Adrian Burden]

IT WORKS!!!!!!!!!!!!!

Michael I took your tip and installed the latest CVS version AND IT
WORKS!!!!!!!!!!!

This has been a few weeks of frustration getting this thing to work.
Now I can start to enjoy Mythtv again!!!!

Next step is to install under Mandrake, I will make notes and post......


-----Original Message-----
From: mythtv-users-bounces at snowman.net
[mailto:mythtv-users-bounces at snowman.net] On Behalf Of Carlos Talbot
Sent: Monday, April 14, 2003 10:24 AM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Others experience with LIRC and Atisys200L


Michael,

first off, lirc allows only one module to be enabled at a time. You 
cannot, for example, load lirc_sir and lirc_serial at the same time.

What device are you trying to record? Were you able to find an entry for

your device in http://www.lirc.org/remotes.tar.bz2 ? It appears some 
people are experiencing issues with the 200L when they try to RECORD ir 
codes. Transmitting works fine so long as you have a valid lircd.conf
file.

Carlos

Michael Hill wrote:

>Hello all,
>First off, I would like to say I love this project.  I have most all 
>mof my mythTv components working now, except for this on snag... I am 
>having the worst time getting the ActiSys200L to work as an IR 
>transmitter.
>
>Current configuration:
>RedHat8
>Lirc 0.6.6 [using lirc_sir module]
>New Via Mobo w/both serial ports turned on
>
>I have tried two different redhat kernels, with serial support built-in

>and modularized.  I have have varied results with different settings, 
>but can never get this to work perfect.  The best I have done so far is

>to see output with mode2 program, and irrecord a settings file, but 
>never get any output from irw after recording a new settings file.  I 
>have tried different remotes as well.
>
>I have seen varying errors loading the lirc_sir module. [resource busy 
>and unbalanced irq(4).]
>
>Can aynone who has this adapter working on redhat share a modules.conf 
>file and rc.d configuration that worked for them. When to use 
>setserial, etc.
>
>Also, any good info on loading two different lirc modules, one for 
>recieving and one for transmitting.
>
>Any help would be appreciated.  Thanks, Mike
>  
>

_______________________________________________
mythtv-users mailing list
mythtv-users at snowman.net
http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users