[mythtv-users] Invalid lp code rate parameter
Jon Dye
jon at pecorous.co.uk
Mon Dec 29 13:30:13 EST 2003
Simon Tennant wrote:
> I'm having trouble with an error message which I cannot track down.
> My log file shows:
>
> 2003-12-29 17:57:33 DVB#0 Using DVB card 0, with frontend Philips TDA10045H.
> 2003-12-29 17:57:33 DVB#0 WARNING - Invalid lp code rate parameter 'master server.
> 2003-12-29 17:57:33 DVB#0 Using DVB card 0, with frontend Philips TDA10045H.
> 2003-12-29 17:57:33 DVB#0 WARNING - Invalid lp code rate parameter '
>
> My setup is as follows:
>
> Debian unstable, 2.4.22-smp kernel, Philips Semiconductors SAA7146 (rev
> 01) aka Hauppauge Nova-T pci card.
There is an lp_code_rate field in the dvb_channel channel which contains
the tuning settings for dvb cards, you might need to change this. Mine
are all set to '1/2' for Nova-T in the UK.
> I am able to successfully tune to channels using tzap:
>
> mythtv at bunker:~$ tzap "BBC 7"
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> tuning to 529833330 Hz
> status 00 | signal c5c5 | snr 8080 | ber 0001fffe | unc 00000000 |
> status 1f | signal c5c5 | snr bebe | ber 0001b552 | unc 00000000 | FE_HAS_LOCK
> status 1f | signal c5c5 | snr c4c4 | ber 0001b73e | unc 00000000 | FE_HAS_LOCK
>
> Trying to cat data from /dev/dvb/adaptor0/dvr0 shows nothing.
try tzap -r "BBC 7" and then leave it running while catting the dvr0
device. You can also point mplayer at it which works well for me.
JD
More information about the mythtv-users
mailing list