[mythtv-users] Single Channel tuning problem

JC johnmythtv at crombe.com
Thu Feb 13 16:40:55 EST 2003


mythfilldatabase --manual

will let you specify a tuning offset for each channel.  Just put in your
custom values for channels 5 and 6, and hold down the Enter key for all the
others (take all the defaults) and you should be all set.

Thanks,
JC

----- Original Message -----
From: "Brian A. Vance" <bvance at egenera.com>
To: <mythtv-users at snowman.net>
Sent: Wednesday, February 12, 2003 11:04 AM
Subject: [mythtv-users] Single Channel tuning problem


> I've been battling the following issue for the past few weeks and am
> stumped.
>
> MythTV (CVS as of 2/11) is working great!  The only problem I am having
> is with the tuning of certain channels.  All other channels come in
> perfectly except for channels 5 and 6 (in the Boston area).
>
> I've verified that I am using the right tuner type (and have even tried
> forcing other just for the heck of it).
>
> xawtv allows for 'fine tuning' of channels and using this I have been
> able to get these channels to tune properly.  I finally can get the
> channel clearly at about 5(+38) in xawtv.  After turning on debug in
> xawtv I can see the exact frequency that the tuner is tuning to.
>
> So the question is this.... Is there some way to tell MythTV to use
> specific frequencies for specific channels?  How can I correctly tune
> these channels?
>
> -Beev
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
> http://www.snowman.net/mailman/listinfo/mythtv-users
>
>




More information about the mythtv-users mailing list