[mythtv-users] Mandrake91, Lirc and the PVR250....Bad combo?

Perry, Aaron aperry at atg.com
Wed Jun 4 14:38:31 EDT 2003


Ahh, I hadn't thought of that (although it makes sense now because I did
read something about the default Lirc modules being broken in
Mandrake91).  

 

I'm going to give that a shot tonight.  Thanks for the tip.  I'll let
you know how it goes.

 

Thanks again,

Aaron

 

 

-----Original Message-----
From: Adrian Burden [mailto:aburden at onegeeksopinion.com] 
Sent: Wednesday, June 04, 2003 1:13 PM
To: 'Discussion about mythtv'
Subject: RE: [mythtv-users] Mandrake91, Lirc and the PVR250....Bad
combo?

 

I personally had problems with lirc and Mandrake 9.1. I found I had to
delete the Mandrake modules, then reinstall the lirc.

See if you have the  lib/modules/2.4.21-0.13mdk/kernel/3rdparty/lirc ,
if so delete it and try again.

	-----Original Message-----
	From: mythtv-users-bounces at snowman.net
[mailto:mythtv-users-bounces at snowman.net] On Behalf Of Perry, Aaron
	Sent: Wednesday, June 04, 2003 8:34 AM
	To: Discussion about mythtv
	Subject: RE: [mythtv-users] Mandrake91, Lirc and the
PVR250....Bad combo?

	Thanks for the link!  Funny thing, I found that post last night
(he actually posted here on Myth as well).  Unfortunately I've tried his
solution, and it hasn't helped.  He actually appears to be using RH, not
Mandrake.  

	 

	I've tried everything I can think of......

	 

	Thanks again,

	Aaron

	 

	 

	 

	 

	-----Original Message-----
	From: Adrian Burden [mailto:aburden at onegeeksopinion.com] 
	Sent: Wednesday, June 04, 2003 11:17 AM
	To: 'Discussion about mythtv'
	Subject: RE: [mythtv-users] Mandrake91, Lirc and the
PVR250....Bad combo?

	 

	Someone just posted this on the lirc list, installing pvr-250 on
Mandrake 9. They said they had to use 0.7.0pre1.

	 

	<snip>

	OK, I FIXED IT!!!   WooHoo! irw now detects remote presses!
	
	The secret is...(what's it worth to you?) ...
	
	You HAVE to download the source from CVS, and build that. Its
version 0.7.0pre1
	See http://www.lirc.org/cvs.html for instructions. (But you DO
have to "make install" at the end, which they don't mention.)
	
	<snip>
	 

		-----Original Message-----
		From: mythtv-users-bounces at snowman.net
[mailto:mythtv-users-bounces at snowman.net] On Behalf Of Perry, Aaron
		Sent: Wednesday, June 04, 2003 5:16 AM
		To: mythtv-users at snowman.net
		Subject: [mythtv-users] Mandrake91, Lirc and the
PVR250....Bad combo?

		I'm running on Mandrake 9.1 with a PVR-250 and for the
life of my I can't get a response from irw after installing lirc.  I've
been struggling with this for a couple of days now.  

		 

		I've followed all of the myth and lirc doc very
carefully.  Lirc compiles fine (latest CVS code).  I've added the
lircd.conf (from ivtv) to /etc.  I've started the lircd_dev and lirc_i2c
modules and added the appropriate lines to the modules.conf file.  

		 

		I just can't get anything to happen when I start irw.
It just sits there, not reporting even a single character as I
feverishly press the buttons on the remote (the new light gray remote).
There aren't even any errors in the /var/log/lircd file!

		 

		I know that the remote and receiver both work because I
dual-boot to WindowsXP and they run fine over there.

		 

		Does anyone have this combo?  Is there a trick to it?

		 

		Thanks,

		Aaron

		 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/attachments/20030604/6dd91cb3/attachment.htm


More information about the mythtv-users mailing list