[mythtv-users] Re: VIDIOSYNC error messages (David Madsen)

[David Madsen]

Thanks a lot.  I was really hoping someone out there might have had a
similar experience. I'll take a look at some of this.

Dave Madsen
----- Original Message -----
From: "Michael Thomson" <linux at M-Thomson.net>
To: <mythtv-users at snowman.net>
Sent: Wednesday, March 05, 2003 4:01 PM
Subject: [mythtv-users] Re: VIDIOSYNC error messages (David Madsen)


> Hello David
>
> I've had similar problems on my 'proof of concept' hardware, which were
> (mostly) resolved by looking into the compatibility modes of bttv.
>
> I saw the following in my output from dmesg:
> bttv: driver version 0.7.105 loaded
> bttv: Host bridge needs ETBF enabled.
> bttv: Host bridge needs VSFX enabled.
>
> This led me to add the following to my /etc/modules.conf:
> options bttv card=xx radio=yy triton1=1 vsfx=1 bttv_verbose=2 bttv_debug=1
> irq_debug=1
> (where xx and yy are the right ones for your setup). The key entries are
> triton1 and vsfx, which are explained in README.quirks and Insmod.options
in
> the bttv source tree.
>
> Hope that helps (or at least gives you more to look at for the right
answer).
>
> Mike
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
> http://www.snowman.net/mailman/listinfo/mythtv-users
>