[mythtv-users] TV-Out and Screen out with PVR 350 - XF86Config
Thomas Hudak
tom at 1337consulting.net
Tue Apr 6 23:19:15 EDT 2004
I have a config that *should* work, it's a simple xinerama screen
(remember the xinerama screen option in the mythtv config?) however I
have a major problem with it, when loading the nvidia accelerated driver
for screen 0, and the fb driver for screen 1 in xinerama makes nvidia
sh*t the bed complaining of unresolved symbols, however xinerama w/
another video card works fine, single head / twinview modes work
perfectly, and the XF86Config for both nvidia, and fb sans any xinerama
configuration works beautifully out to the monitor and TV respectively -
just not at the same time. hmph...
Maybe I'll submit someone a bug report one day, until then I need to pay
my rent, eat some food, sleep, and watch all my new commercial free TV
in high quality..
If anyone using non-nvidia cards has gotten a xinerama
<x_driver_here>/fbdev combo to work, could you describe the experience?
I'm sure it's glorious!
(BTW, using xinerama screen 1 in the myth config in twinview w/ nvidia
tv-out and X on the monitor does work, but tv-out is so horribly fubar
it's not worth it until you turn off twinview.)
l8r
-Tom
On Tue, 2004-04-06 at 21:23, Tom Lianza wrote:
> Hi all,
>
> I can successfully do the following thanks in large part to Jarod
> Wilson's guide:
> 1) Use myth to watch TV on my desktop
> 2) Use myth to watch TV on my TV
> 3) Use myth on the desktop, but spit the TV content to the TV
>
> What I'd really like to do is #1 and #2 at the same time though. My
> understanding is that this can all be achieved via the wonders of the
> XF86Config file, but it's not working for me. If anyone has a sample
> config file that does this (runs X on the monitor *and* on the TV via
> the 350 simultaneously) I would be very appreciative. My current config
> file looks like this:
>
> http://lianza.org/XF86Config
>
> If I comment out either the TV or the Monitor, everything works fine (on
> the other). If I uncomment both, I get an error about not being able
> to run in framebuffer mode and that I should specify the busID's. I
> think I did specify them, unless I screwed up. They work fine alone,
> just not together.
>
> The relevant portions of the lspci -v command are here:
>
> ----------------------------------------------
> 00:0b.0 Multimedia video controller: Internext Compression Inc iTVC15
> MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR-350
> Flags: bus master, medium devsel, latency 64, IRQ 11
> Memory at c8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD
> [Radeon 7200] (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Radeon 7000/Radeon VE
> Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 5
> Memory at b8000000 (32-bit, prefetchable) [size=128M]
> I/O ports at b800 [size=256]
> Memory at cfe80000 (32-bit, non-prefetchable) [size=512K]
> Expansion ROM at cfe60000 [disabled] [size=128K]
> Capabilities: [58] AGP version 2.0
> Capabilities: [50] Power Management version 2
>
> ----------------------------------------------
>
> Any help would be much appreciated. Thanks!
>
> Tom
>
> ______________________________________________________________________
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list