[mythtv-users] Trouble with LIRC and Myth
Dan Conti
dconti at acm.wwu.edu
Sat Apr 17 12:47:42 EDT 2004
Do you have a lircrc file for myth?
Do you see any error messages when you start myth (such as 'cannot open socket')?
Are you running lirc 0.7pre4?
-----Original Message-----
From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-bounces at mythtv.org]On Behalf Of Michael Segulja
Sent: Saturday, April 17, 2004 8:50 AM
To: MythTV Users
Subject: [mythtv-users] Trouble with LIRC and Myth
I bought an IR receiver from manoweb.com a few days ago, so I'm trying to get lirc and myth working, but am running into some trouble and I'm not real sure where to turn. I believe I have lirc working correctly because I can see that it is receiving codes from my remote. I installed lirc from source, and ran irrecord to set up my remote. I followed the documentation and also recompiled myth after enabling native lirc support in settings.pro.
If I run irw I can see my buttons being received by lirc, but Myth does nothing. I am also receiving one error when I run modprobe lirc_serial. Here it is:
/lib/modules/2.4.22-28mdk/kernel/3rdparty/lirc/lirc_serial.o.gz: init_module: Input/output error
modprobe: insmod /lib/modules/2.4.22-28mdk/kernel/3rdparty/lirc/lirc_serial.o.gz failed
Starting Linux Infrared Remote Control daemon: [ OK ]
I also get this in the log:
Apr 17 10:44:41 darthmaul kernel: lirc_serial: auto-detected active low receiver
Apr 17 10:44:41 darthmaul kernel: _devfs_append_entry(serial): dir: "lirc" is not a directory
Apr 17 10:44:41 darthmaul kernel: devfs_register(lirc/serial): could not append to parent, err: -20
Apr 17 10:44:41 darthmaul kernel: lirc_serial: devfs_register failed!
Apr 17 10:44:41 darthmaul kernel: lirc_serial: in calc_pulse_lengths_in_clocks, freq=38000, duty_cycle=50, clk/jiffy=7290880, pulse=9593, space=9593, conv_us_to_clocks=729
Apr 17 10:44:42 darthmaul kernel: lirc_serial: auto-detected active low receiver
Apr 17 10:44:42 darthmaul lircd 0.6.6[8809]: lircd(any) ready
Apr 17 10:44:42 darthmaul lircd: lircd startup succeeded
I'm not sure what this stuff about dev_fs is. I have /dev/lirc, /dev/lircd, and /dev/lircmd and that's all. I set the following in /etc/sysconf/lircd:
DRIVER=default
HWMOD=lirc_serial
# with devfs enabled -> not sure what this is
#DEVICE=/dev/lirc/0
# without devfs -> not sure what this is
DEVICE=/dev/lirc
COM_PORT=/dev/ttyS0
I have no prior experience with lirc, so I'm not sure what to look at or how to get rid of the problems above. I can't tell because of these errors if the problem is with lirc or with Myth not using lirc for some reason.
I appreciate anybody's help or advice or pointers.
Thank you,
---
Michael Segulja
LMD Computing Solutions, Inc.
281.376-8181 | Office
281.300.8285 | Mobile
832.717.5126 | Fax
www.lmdcs.com
More information about the mythtv-users
mailing list