[mythtv-users] Free USB RF remote (just $5.90 for shipping)

[Johnny Lee]

It should say "atiusb" in your dmesg output after a reboot. If you don't see
lirc detecting this then that could be your problem.  


Johnny Lee

-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Dex West
Sent: Monday, April 26, 2004 12:02 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Free USB RF remote (just $5.90 for shipping)


--- Kristo Kriechbaum <klk+myth at robotics.caltech.edu>
wrote:
> So I got my "x10 lola" remote yesterday.  Trying to
> figure out how to
> scrape off that stupid logo without scratching the
> hell out of it.
> 
> I'm running:
> kernel 2.4.22-1.2179.nptl_47.rhfc1.at, 
> lirc-0.7.0-20_cvs20040208.rhfc1.at, and
>
lirc-kmdl-2.4.22-1.2179.nptl_47.rhfc1.at-0.7.0-20_cvs20040208.rhfc1.at
> 
> all from atrpms.
I've worked all weekend trying to get lirc to work. 
I've grabbed all three items above.  Did you have to
compile the lirc source?  Did you add something to the
module.conf to get lircd running?  From what I
understand at this point based on reading the
documentation you need to compile source, install
source, and then configure module.conf to load the
lircd based on a precompiled driver (i.e. serial, or
other).
> 
> When I plugged in the reciever, it just worked.  It
> loaded the
> lirc_atiusb module.
What is "it loaded the lirc_atiusb module" mean?  I've
found the atiusb source directory under remotes, but
don't have a driver file.
> 
> Attached is my config file for this remote (the one
> you want to rename
> lircd.conf).  I named all the buttons exactly as
> they are named on the
> remote, except for "end", which I had to name "_end"
> because won't let
> you have a button named end for some reason.  "pc"
> was selected the
> entire time (ie not tv, audio, cable, or x10 - but
> oddly enough you
> can learn those buttons too).  It's up to you to
> make your own .lircrc
> to make the buttons do something useful.
> 
> Let me know if you find that I did something
> incorrectly.
> 
> Enjoy!
> 
> -kristo
> 
> 
> > # Please make this file available to others
> # by sending it to <lirc at bartelmus.de>
> #
> # this config file was automatically generated
> # using lirc-0.7.0pre1(any) on Fri Apr 23 23:05:47
> 2004
> #
> # contributed by Kristo Kriechbaum
> <klk_lirc at robotics.caltech.edu>
> #
> # brand:                       X10 "Lola" remote
> control
> # model no. of remote control: UR89A
> # devices being controlled by this remote:
> #
> 
> begin remote
> 
>   name  x10_lola
>   bits           16
>   eps            30
>   aeps          100
> 
>   one             0     0
>   zero            0     0
>   pre_data_bits   8
>   pre_data       0x14
>   post_data_bits  16
>   post_data      0x8000
>   gap          139985
>   toggle_bit      0
> 
> 
>       begin codes
>           power                   
> 0x0000000000005702
>           rec                     
> 0x0000000000007C27
>           stop                    
> 0x0000000000007D28
>           pause                   
> 0x0000000000007E29
>           scan-                   
> 0x000000000000802B
>           rew                     
> 0x0000000000007924
>           play                    
> 0x0000000000007A25
>           ff                      
> 0x0000000000007B26
>           scan+                   
> 0x0000000000007F2A
>           top                     
> 0x000000000000832E
>           _end                    
> 0x000000000000842F
>           find                    
> 0x0000000000005C07
>           select                  
> 0x0000000000008530
>           playlist                
> 0x0000000000005601
>           playing                 
> 0x000000000000822D
>           page_up                 
> 0x000000000000711C
>           page_down               
> 0x0000000000007520
>           album                   
> 0x0000000000006E19
>           artist                  
> 0x000000000000701B
>           genre                   
> 0x0000000000007621
>           track                   
> 0x0000000000007823
>           add_delete              
> 0x0000000000006B16
>           a/b                     
> 0x0000000000006D18
>           0                       
> 0x0000000000006C17
>           9                       
> 0x0000000000006A15
>           8                       
> 0x0000000000006914
>           7                       
> 0x0000000000006813
>           6                       
> 0x0000000000006712
>           5                       
> 0x0000000000006611
>           4                       
> 0x0000000000006510
>           3                       
> 0x000000000000640F
>           2                       
> 0x000000000000630E
>           1                       
> 0x000000000000620D
>           ch-                     
> 0x000000000000610C
>           ch+                     
> 0x000000000000600B
>           vol-                    
> 0x0000000000005D08
>           vol+                    
> 0x0000000000005E09
>           m                       
> 0x0000000000005F0A
>           enter                   
> 0x000000000000731E
>           pad_up                  
> 0x0000000000006F1A
>           pad_down                
> 0x0000000000007722
>           pad_left                
> 0x000000000000721D
>           pad_right               
> 0x000000000000741F
>           learn                   
> 0x000000000000812C
>           setup                   
> 0x0000000000005500
>           tv                      
> 0x0000000000005803
>           audio                   
> 0x0000000000005904
>           cbl                     
> 0x0000000000008631
>           pc                      
> 0x0000000000005A05
>           x10                     
> 0x0000000000005B06
>       end codes
> 
> end remote
> 
> 
> > _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
>
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 



	
		
__________________________________
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25"
http://photos.yahoo.com/ph/print_splash