[mythtv-users] Re: /dev/lirc working, lircd/irw not?

Joakim Kolsjö trejje at gmail.com
Sun Dec 5 14:58:47 UTC 2004


thank you! that config worked :)


On Sun, 5 Dec 2004 13:18:45 +0100, Ryszard <ryszard99 at gmail.com> wrote:
> there is a "new" hauppauge grey remote and an old one.  i had almost
> the same problem, ie an strace on the lircd daemon showed it seeing
> the button presses, but irw wouldnt.  i changed my lircd file and it
> "just worked".
> 
> # Please make this file available to others
> # by sending it to <lirc at bartelmus.de>
> #
> # this config file was automatically generated
> # using lirc-0.7.0(hauppauge) on Tue Nov 30 00:38:32 2004
> #
> # contributed by
> #
> # brand:                       lirc.conf
> # model no. of remote control:
> # devices being controlled by this remote:
> #
> 
> begin remote
> 
>   name  grayHauppauge
>   bits           13
>   flags RC5
>   eps            30
>   aeps          100
> 
>   one             0     0
>   zero            0     0
>   gap          200966
>   repeat_bit    2
> 
>       begin codes
>           Power                    0x00000000000017BD
>           Go                       0x0000000000001FBB
>           TV                       0x000000000000179C
>           Videos                   0x0000000000001F98
>           Music                    0x0000000000001799
>           Pictures                 0x0000000000001F9A
>           Guide                    0x000000000000179B
>           Radio                    0x0000000000001F8C
>           UP                       0x0000000000001794
>           LEFT                     0x0000000000001F96
>           RIGHT                    0x0000000000001797
>           DOWN                     0x0000000000001F95
>           OK                       0x00000000000017A5
>           Back-Exit                0x0000000000001F9F
>           Menu                     0x000000000000178D
>           Prev-Channel             0x0000000000001F92
>           Mute                     0x000000000000178F
>           Volume-UP                0x0000000000001F90
>           Volume-DOWN              0x0000000000001791
>           Channel-UP               0x0000000000001FA0
>           Channel-DOWN             0x00000000000017A1
>           Record                   0x0000000000001FB7
>           Stop                     0x00000000000017B6
>           Rewind                   0x0000000000001FB2
>           Forward                  0x00000000000017B4
>           Play                     0x0000000000001FB5
>           Previous                 0x00000000000017A4
>           Next                     0x0000000000001F9E
>           Pause                    0x00000000000017B0
>           1                        0x0000000000001F81
>           2                        0x0000000000001782
>           3                        0x0000000000001F83
>           4                        0x0000000000001784
>           5                        0x0000000000001F85
>           6                        0x0000000000001786
>           7                        0x0000000000001F87
>           8                        0x0000000000001788
>           9                        0x0000000000001F89
>           0                        0x0000000000001780
>           star                     0x0000000000001F8A
>           hash                     0x000000000000178E
>           red                      0x0000000000001F8B
>           green                    0x00000000000017AE
>           yellow                   0x0000000000001FB8
>           blue                     0x00000000000017A9
>       end codes
> 
> end remote
> 
> 
> 
> 
> On Sat, 04 Dec 2004 23:09:11 -0400, Kyle Kelly <kyle at kylekelly.com> wrote:
> > Joakim Kolsjö wrote:
> >
> >
> >
> > >>My tv-out card is an hauppauge wintv pvr 250 and i use the included
> > >>remote control.
> > >>
> > >>
> > >
> > >"tv-out" hehe... gotta double check my writing sometimes :P
> > >
> > >
> > >------------------------------------------------------------------------
> > >
> > >_______________________________________________
> > >mythtv-users mailing list
> > >mythtv-users at mythtv.org
> > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> > >
> > Have you used irrecord to setup your lircd.conf?
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>


More information about the mythtv-users mailing list