[mythtv-users] Hauppauge IR Receiver
ho_9 at hotmail.com
Thu Jan 1 04:25:08 EST 2004
I think that's the first time I ever got more than one reply
to a posting before I could respond. You guys must
really want this info. Let's hope I'm not to wasted from
New Year's and I get this right ;-)
Base = GND
Ring = signal
Tip = VCC+
In case there is doubt, that's the conductors listed
from the cable end of the plug to the tip in order.
Gentlemen, start your soldering irons!!
-- Harry O.
>From: "MythTV User" <mythtv_user at lambdaaccess.com>
>To: Discussion about mythtv <mythtv-users at mythtv.org>
>CC: ho_9 at hotmail.com
>Subject: RE: [mythtv-users] Hauppauge IR Receiver
>Date: Wed, 31 Dec 2003 14:21:29 -0500
>I would greatly appreciate the pinout.
> > >From: "MythTV User" <mythtv_user at lambdaaccess.com>
> > >Reply-To: Discussion about mythtv <mythtv-users at mythtv.org>
> > >To: mythtv-users at mythtv.org
> > >Subject: [mythtv-users] Hauppauge IR Receiver
> > >Date: Tue, 30 Dec 2003 12:55:59 -0500
> > >
> > >I purchased a Hauppauge PVR-250 on e-bay and it came with the remote,
> > >but not the IR Receiver (despite the fact that the guy who sold it to
> > >me claimed he was shipping everything that originally came in the
> > >package).
> > >Anyone have any information on how I can build or buy one that plugs
> > >into the PVR-250? I would rather do that than use a serial port
> > >version since I only have one RS232 port.
> > >Thanks
> > >
> > >_______________________________________________
> > >mythtv-users mailing list
> > >mythtv-users at mythtv.org
> > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > You can either buy the IR receiver from Radio Shack and put it on the
> > end of a long 3 conductor cable with a 3/32" stereo plug at the end
> > (I have the pinout somewhere if you need it) or you can call up
> > Hauppauge and order a replacement or there is a third alternative
> > which I can think of but is somewhat dishonest and I kind of have
> > good feelings towards Hauppauge (you might be able to guess what
> > it is).
> > Any standard IR receiver should work. The frequency should be
> > approx. 36kHz. Similar frequencies would work but the range might
> > be limited. The Radio Shack part number is 276-640 (according to
> > the LIRC site).
> > Let me know if you need the pinout for the plug.
> > -- Harry O.
> > _________________________________________________________________
> > Take advantage of our limited-time introductory offer for dial-up
> > access. http://join.msn.com/?page=dept/dialup
Make your home warm and cozy this winter with tips from MSN House & Home.
More information about the mythtv-users