[mythtv-users] What's happening??? (Newbie)

[Jarod C. Wilson]

On Jan 15, 2004, at 6:34 PM, Sean Stagg wrote:

> Sorry for the long email, I've followed wilsonet.com/mythtv/ and have 
> run into some errors: PLEASE HELP! Motherboard is Epox 8rda+, nforce2
>
> At startup
> localhost lm_sensors: Starting up sensors:
> localhost lm_sensors: Can't access /proc file
> localhost lm_sensors:
> localhost lm_sensors: Unable to find i2c bus information;
> localhost lm_sensors: For 2.6 kernels, make sure you have mounted 
> sysfs!
> localhost lm_sensors: For older kernels, make sure you have done 
> 'modprobe i2c-proc'!
> localhost rc: Starting lm_sensors:  failed

Just means you haven't configured lm_sensors. You can simply 'chkconfig 
lm_sensors off' if you don't want to see that anymore, or go through 
and set it up. It is unrelated to the lirc problem.

> At shutdown
> localhost lircd: lircd shutdown failed
>
> [root at localhost azureus]# /sbin/service lircd status
> lircd (pid 9669) is running...
>
> shortly after my cpu goes to 10% idle...
> [root at localhost azureus]# /sbin/service lircd status
> lircd dead but subsys locked
>
> /sbin/service lircd stop
> Stopping infrared remote control daemon:                   [FAILED]

It is starting, then puking, because...

> My modules.conf file:
> path[toplevel]=/lib/modules/`uname -r`/updates
> # default path
> path[toplevel]=/lib/modules/`uname -r`
> alias char-major-81 videodev
> alias usb-controller usb-ohci
> alias usb-controller1 ehci-hcd
> #alias usb-interface usb-ohci
> # Include this in your /etc/modules.conf
> # Be sure that there are no other bttv/i2c related module-options 
> around!
> # Generated by find_tvcardoptions.sh
> # i2c
> alias char-major-89 i2c-dev
> options i2c-core i2c_debug=1
> options i2c-algo-bit bit_test=1
> # bttv
> alias char-major-81-0 bttv
> options bttv card=10 pll=0
> options tuner type=8 debug=0
> options msp3400 once=1 simple=1
> post-install bttv modprobe tuner; modprobe videodev
> #alias eth0 nvnet
> alias eth0 nvnet
> alias usb-interface usb-ohci
> # nvidia kernel module
> alias char-major-195 nvidia-1.0-4363
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 1.0.1 ---
> alias char-major-116 snd
> alias char-major-14 soundcore
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> alias snd-card-0 snd-emu10k1
> alias sound-slot-0 snd-emu10k1
> options snd-emu10k1 enable_ir=1
> # --- END: Generated by ALSACONF, do not edit. ---
>
> Why/how am I getting these errors?? Please help

...I don't see a char-major-61 entry anywhere in there for lirc. What 
lirc device are you attempting to use? You aren't ever loading an lirc 
module, thus lircd is bombing out...

-- 
Jarod C. Wilson, RHCE

Got a question? Read this first...
     http://catb.org/~esr/faqs/smart-questions.html
MythTV, Fedora Core & ATrpms documentation:
     http://wilsonet.com/mythtv/
MythTV Searchable Mailing List Archive
     http://www.gossamer-threads.com/archive/MythTV_C2/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGP.sig
Type: application/pgp-signature
Size: 186 bytes
Desc: This is a digitally signed message part
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20040115/56c26c30/PGP.pgp