[mythtv-users] Modelines/Video timings
gerald.gryschuk at shaw.ca
Thu Jan 29 02:57:13 EST 2004
I tried your modeline and it's better than what I had been getting but
it's still far from satisfactory(obviously not your problem/fault).
Since I just bought the KDS adapter a couple of weeks ago I'm going to
see if I can trade it for the Audio Authority and see what happens with
Thanks again for the info.
On Wed, 2004-01-28 at 01:02, Jarod C. Wilson wrote:
> On Jan 27, 2004, at 22:08, Gerald Gryschuk wrote:
> > Well I've just spent two days trying to get Powerstrip to output a
> > signal that my TV would use correctly. I'm about to give up and move on
> > to something else but I thought I would try here first for a possible
> > solution.
> > The situation is that I'm trying to output video to my Panasonic HDTV
> > using a VGA to 3 component video adapter at greater than 640x480. My
> > specs are as follows,I have both an nvidia and ATI video cards and I
> > don't care which one I use to make this work
> > Panasonic HDTV PT-47WX52CF
> > NVIDIA GeForce MX440 64MB from MSI or ATI Radeon 9200 SE 128MB from
> > Saphire
> > Key Digital Systems ClearColor3 VGA to 3 Component video adapter
> > ABIT KV7 Motherboard
> > 512 MB
> > AMD Athlon 2600+
> > If anyone has suggestions for Modelines that should make this work I'd
> > appreciate hearing from you. Please note which video card they are for.
> Your TV model is very close to mine. I'm not certain the exact model
> I've got, but its a 47" Panasonic. I use an Audio Authority 9A60 VGA to
> component video adapter and GeForce 4 MX (nForce2 onboard), feeding the
> TV a 960x540p mode. You can see my whole XF86Config here:
> There's also a 1920x540p mode, but it looks funky. I've heard from
> someone that nVidia is working on possibly bringing back the ability to
> output interlaced modes, so 1920x1080i might be possible in the future,
> but not just yet...
Gerald Gryschuk <gerald.gryschuk at shaw.ca>
More information about the mythtv-users