[mythtv-users] mplayer works but NOT in via mythvideo...

Nowhere nowhere at cox.net
Wed Jul 14 22:10:08 EDT 2004


Since upgrading to the latest CVS I am unable to get any sound from
mplayer when using mythvideo. If I launch the identical commandline from
a terminal as that which is set up in myth, mplayer works fine.

I have a couple errors that are displayed when launching mplayer but
they are identical in mythvideo (no sound) and from the command line. I
sent each to a txt file and did a diff with no differences. Below I have
included the log data.

I am about to try recompiling mythvideo because I cannot think of
anything to try. Please let me know if you have any ideas.

Thanks,
Eric

My MythBox:
Athlon XP 2000+, MSI K7N2GM-L, 512MB Kbyte, 80GB Seagate Single Platter,
2xPVR250 Coolmax CX300B Silent PSU, Coolermaster ATC-610BX1 Case, Fedora
Core 1, 2.4.22-1.2179 kernel, myth 0.15.20040505.1

========================================================
== WORKS ===============================================
========================================================
[mythtv at localhost videos]$ mplayer -fs -zoom -quiet -vo xv -ao alsa1x
Farscape101\ -\ Premiere.avi
mplayer:
/usr/X11R6/lib/nvidia-graphics-1.0-4363/libXvMCNVIDIA_dynamic.so.1: no
version information available (required by mplayer)
MPlayer 1.0pre4-3.3.2 (C) 2000-2004 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1665 MHz (Family:
6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Reading config file /etc/mplayer/mplayer.conf
Reading config file /home/mythtv/.mplayer/config
Reading /home/mythtv/.mplayer/codecs.conf: Can't open
'/home/mythtv/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf':
No such file or directory
Using built-in default codecs.conf.
font: can't open file: /home/mythtv/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Using usleep() timing
Can't open input config file /home/mythtv/.mplayer/input.conf: No such
file or directory
Can't open input config file /etc/mplayer/input.conf: No such file or
directory
Falling back on default (hardcoded) input config
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...

Playing Farscape101 - Premiere.avi.
AVI file format detected.
VIDEO:  [DIV3]  512x352  24bpp  25.000 fps  809.0 kbps (98.8 kbyte/s)
========================================================================
==
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
========================================================================
==
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local
display)
========================================================================
==
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4
v3))
========================================================================
==
Checking audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: requested format: 48000 Hz, 2 channels, Signed 16-bit
(Little-Endian)
alsa-init: 1 soundcard found, using: hw:0,0
alsa1x: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit
Little Endian
AO: [alsa1x] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 512 x 352 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 512x352 => 512x352 Planar YV12  [fs] [zoom]

========================================================
== Doesnt WORK =========================================
========================================================
[mythtv at localhost videos]$ mythfrontend&
[1] 8376
[mythtv at localhost videos]$ 2004-07-14 18:25:00 mythfrontend version:
0.15.20040528-1 www.mythtv.org
2004-07-14 18:25:00 Enabled verbose msgs : important general
2004-07-14 18:25:01 Registering Internal as a media playback plugin.
Unable to initialize plugin 'mythbookmarkmanager'.
Unable to initialize plugin 'mythdvd'.
2004-07-14 18:25:01 Registering MythMusic Media Handler as a media
handler
Unable to initialize plugin 'mythnews'.
mplayer:
/usr/X11R6/lib/nvidia-graphics-1.0-4363/libXvMCNVIDIA_dynamic.so.1: no
version information available (required by mplayer)
MPlayer 1.0pre4-3.3.2 (C) 2000-2004 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1665 MHz (Family:
6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Reading config file /etc/mplayer/mplayer.conf
Reading config file /home/mythtv/.mplayer/config
Reading /home/mythtv/.mplayer/codecs.conf: Can't open
'/home/mythtv/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf':
No such file or directory
Using built-in default codecs.conf.
font: can't open file: /home/mythtv/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
startup scripts.
Using usleep() timing
Can't open input config file /home/mythtv/.mplayer/input.conf: No such
file or directory
Can't open input config file /etc/mplayer/input.conf: No such file or
directory
Falling back on default (hardcoded) input config
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...






More information about the mythtv-users mailing list