[mythtv-users] PVR350 TV-OUT (PAL) not Working (probably X-Server
Config?)
IvanK.
chepati at yahoo.com
Thu Jul 22 18:54:21 EDT 2004
Try this link:
http://ivtv.writeme.ch/tiki-index.php?page=TvOutHowto
it has some important updates. What version of ivtv are using? 0.1.9? The
the 0.1.10-pre2-ck series. Keep in mind that the newest are bleeding edge
developers' releases and may, and probably will, be broken. I'm running 70
something.
IvanK.
On Thursday 22 July 2004 06:14 pm, Frank Bertling wrote:
> Hi all,
>
> after several (estimated 100's) tries I'd like to get some professional
> advice on my problems, which is using the PVR350s TV-Out for MythTV
>
> What have I done? I installed the system based on a c't (German Computer
> Magazine) Distribution and I'm currently using a PVR350 and a Nexus DVB-S
> Capture Card. But before I'd like to configure the DVB-S I'd like to get my
> PVR350 TV-OUT working, but it won't.
>
> So what I#ve done up to now is:
>
> I followed the great thread "My first attempt at PVR-350 TV-out "howto"
> (very LONG)" to get my TV_Out working.
>
> I've seen the color pattern clearly on the screen. So far so good. So in my
> opinion there is no problem with the card or the modules. But when I start
> the X-Server I get a "running" picture (like one might have had in former
> computer times when resolution was wrong) So I can guess that the X -
> Server is running, becaus I know the look from the desktop, but I cannot
> get a clear picture.
>
> This even occurs somehow with the X-Server not started (when manually
> inserting the ivtv-fb)
>
> Relevant ? part of my modules.conf
>
> options ivtv ivtv_debug=1 ivtv_pal=1 tuner=5
> options tuner type=5 pal=1
> options msp3400 once=1 simple=1
> add below msp3400 tuner
> add below saa7115 msp3400
> add below ivtv saa7115
> #add test_image=1 to get a test picture
> #change out_select for non composite
> #get options by calling modinfo on module file
> options saa7127 enable_output=1 output_select=0 pal=1
> #uncomment the following lines to use your pvr350 for output
> add above ivtv ivtv-fb
> add below ivtv saa7127
>
>
> So I've tried several changes to my XF86Config-4 file, but either it had no
> effect or the X server wouldn't start at all.
>
> I would really get some advise.
>
> Thanks for reading and even more for helping.
>
> Frank
> P.S. Sorry for the bad english, but I am a german guy.
>
> Following parts from kernel log & XF86Config-4 & X-Log
> ----------------------------------------------------------------------
> Kernel Log
> ----------------------------------------------------------------------
> Jul 22 23:47:43 vdr kernel: PCI: Found IRQ 11 for device 00:0a.0
> Jul 22 23:47:43 vdr kernel: PCI: Sharing IRQ 11 with 00:02.7
> Jul 22 23:47:43 vdr kernel: tuner: chip found @ 0xc2
> Jul 22 23:47:43 vdr kernel: i2c-core.o: client [(tuner unset)] registered
> to adapter [ivtv i2c driver #0](pos. 0).
> Jul 22 23:47:43 vdr kernel: tuner: type forced to -1 (<NULL>) [insmod]
> Jul 22 23:47:43 vdr kernel: tuner: type set to 5 (Philips PAL_BG (FI1216
> and compatibles))
> Jul 22 23:47:45 vdr kernel: saa7127: Configuring encoder...i2c-core.o:
> client [saa7127[0]] registered to adapter [ivtv i2c driver #0](pos. 1).
> Jul 22 23:47:45 vdr kernel: saa7114.c: starting probe for adapter ivtv i2c
> driver #0 (0x10005)
> Jul 22 23:47:45 vdr kernel: saa7114.c: detecting saa7114 client on address
> 0x42
> Jul 22 23:47:45 vdr kernel: saa7115.c: writing init values
> Jul 22 23:47:47 vdr kernel: status: (1E) 0x48, (1F) 0xc0
> Jul 22 23:47:47 vdr kernel: i2c-core.o: client [saa7115[0]] registered to
> adapter [ivtv i2c driver #0](pos. 2).
> Jul 22 23:47:47 vdr kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM
> support Jul 22 23:47:47 vdr kernel: msp3410: daemon started
> Jul 22 23:47:47 vdr kernel: i2c-core.o: client [MSP3418W-A2] registered to
> adapter [ivtv i2c driver #0](pos. 3).
> Jul 22 23:47:47 vdr kernel: i2c-core.o: adapter ivtv i2c driver #0
> registered as adapter 0.
> Jul 22 23:47:49 vdr kernel: ivtv: Encoder revision: 0x02040011
> Jul 22 23:47:49 vdr kernel: ivtv: Decoder revision: 0x02020023
> Jul 22 23:47:49 vdr kernel: tuner: type already set (5)
> Jul 22 23:47:49 vdr kernel: ivtv: Device or minor 0 not accepted
> Jul 22 23:47:49 vdr kernel: ivtv: Registered v4l2 device, minor 1
> Jul 22 23:47:49 vdr kernel: ivtv: Registered v4l2 device, minor 32
> Jul 22 23:47:49 vdr kernel: ivtv: Registered v4l2 device, minor 224
> Jul 22 23:47:49 vdr kernel: ivtv: Registered v4l2 device, minor 16
> Jul 22 23:47:49 vdr kernel: ivtv: loaded
> Jul 22 23:47:49 vdr kernel: ivtv-fb: Framebuffer module loaded (attached to
> ivtv card id 0)
> Jul 22 23:47:49 vdr kernel: ivtv-fb: screen coords: [0 0] -> [720 576]
> Jul 22 23:47:49 vdr kernel: ivtv-fb: original global alpha = 208
> Jul 22 23:47:49 vdr kernel: ivtv-fb: new global alpha = 208
> Jul 22 23:47:50 vdr kernel: ivtv-fb: current OSD state = 35
> Jul 22 23:47:50 vdr kernel: ivtv-fb: warning: cannot reserve video memory
> at 0xd9510000
> Jul 22 23:47:50 vdr kernel: ivtv-fb: framebuffer at 0xd9510000, mapped to
> 0xcae7c000, size 2818k
> Jul 22 23:47:50 vdr kernel: ivtv-fb: mode is 720x576x32, linelength=2880
> Jul 22 23:47:50 vdr kernel: Console: switching to colour frame buffer
> device 90x36
> Jul 22 23:47:50 vdr kernel: fb0: iTVC15 TV out frame buffer device
>
> ----------------------------------------------------------------------
> XF86Config-4
> ----------------------------------------------------------------------
> Section "Files"
> #FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
>
> Load "fbdevhw"
>
> EndSection
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "de"
> Option "XkbVariant" "de"
> EndSection
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "PS/2"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "ZAxisMapping" "4 5"
> EndSection
> Section "Device"
> Identifier "Standardgrafikkarte"
> Driver "sis"
> BusID "PCI:1:0:0"
> EndSection
>
> ### Bertling
>
> Section "Device"
> Identifier "PVR350"
> Driver "fbdev"
> ### change fb0 to whatever your card grabbed
> Option "fbdev" "/dev/fb0"
> ### change the busid to whatever is reported by lspci. Note that
> ### output of lspci is hex, so add a preceding "0x" to the BusID
> BusID "PCI:0:0x10:0"
> EndSection
>
> Section "Monitor"
> Identifier "PAL"
> HorizSync 30-68
> VertRefresh 50-120
> Mode "720x576"
> #D: 41.475 MHz, H: 44.693 kHz, V: 74.488 Hz
> DotClock 41.476
> HTimings 720 752 840 928
> VTimings 576 580 584 600
> Flags "-HSync" "-VSync"
> EndMode
> EndSection
> Section "Screen"
> Identifier "TV"
> Device "PVR350"
> Monitor "PAL"
> DefaultDepth 24
> DefaultFbbpp 32
> Subsection "Display"
> Depth 24
> FbBpp 32
> Modes "720x576"
> EndSubsection
> EndSection
> ### Bertling
> Section "Monitor"
> Identifier "Standardbildschirm"
> HorizSync 30-70
> VertRefresh 50-160
> Option "DPMS"
> EndSection
> Section "Screen"
> Identifier "Default Screen"
> Device "Standardgrafikkarte"
> Monitor "Standardbildschirm"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "800x600" "640x480"
> EndSubSection
> EndSection
> Section "ServerLayout"
> Identifier "Default Layout"
> #Screen "Default Screen"
> #Screen "TV" LeftOf "Default Screen"
> Screen "TV"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
> Section "DRI"
> Group 0
> Mode 0666
> EndSection
> ---------------------------------------------------
More information about the mythtv-users
mailing list