[mythtv-users] OT: Lirc Problems
iggy88 at gmail.com
Thu Jul 29 16:04:39 EDT 2004
Ok i got the reciever working, the command to release the serial port
was setserial /dev/ttyS0 uart none not setserial /dev/tty0 uart none.
But now i am having trubble with my transmitter. When i compiled lirc,
i used the homebrew reciever option with the option to use
transmitter diode. I have a hb reciever with a trans on the same port.
Can anyone tell me how to get the trans working, or if i have to
install another copy of lirc, witch option do i choose?
On Thu, 29 Jul 2004 10:16:50 -0700, Ignacio Rodriguez <iggy88 at gmail.com> wrote:
> On Thu, 29 Jul 2004 03:49:24 -0400, Michael T. Dean
> <mtdean at thirdcontact.com> wrote:
> > Ignacio Rodriguez wrote:
> > >That made me think the module is already loaded
> > >
> > >
> > Actually, you've either got the serial module (the kernel's serial port
> > driver) loaded or serial support compiled into the kernel.
> > If you've got a serial module,
> > rmmod serial
> This gave me this message:
> mythtv:~# rmmod serial
> ERROR: Module serial does not exist in /proc/modules
> > modprobe lirc_serial
> I Still get.
> mythtv:~# modprobe lirc_serial
> FATAL: Error inserting lirc_serial
> (/lib/modules/2.6.7iggy-3/misc/lirc_serial.ko): Device or resource
> > If serial support is compiled into the kernel,
> > setserial /dev/tty0 uart none
> I get:
> mythtv:~# setserial /dev/tty0 uart none
> Cannot get serial info: Invalid argument
> > Mike
> It still is working, but thanks for your suggestions, and if you can
> think of anything else i would be very thankful.
More information about the mythtv-users