[mythtv-users] Dual NTSC/ATSC Setup
jcw at wilsonet.com
Tue Jun 1 14:31:29 EDT 2004
On Jun 1, 2004, at 07:33, Debian User wrote:
> On Mon, May 31, 2004 at 11:11:10PM -0400, Daniel Thor Kristjansson
>> Any reason why you think you will have problems with this setup?
> I think it was the bit in the setup program where I had to choose
> the backend global setup "mode" to be NTSC or ATSC. ;)
Yes, there is a global mode, but there are also per-card overrides.
> What do I choose for this setting?
In the setup util (where you define inputs, guide data sources, etc.).
> I assume adding an HDTV
> video source and connecting that to the pcHDTV is sufficient
> to tell Myth which card to use for what.
Double-check that the global mode is being overridden for the pcHDTV
> Now of course I
> don't know how to go about specifying an over-the-air HDTV
> source as my video sources list doesn't seem to include
> anything like that.
You basically pull down the corresponding non-HDTV guide data, then
edit the frequency tables. At least that used to be what you had to do,
I haven't played with my pcHDTV card in ages...
>> I'm using a PVR-250 & pcHDTV.
> Good to know it's possible! Thanks!
> Now the next question: do we have support yet for mode switching
> of capture cards, allowing the pcHDTV to capture ATSC or NTSC?
No, I don't believe so.
Jarod C. Wilson, RHCE
Got a question? Read this first...
MythTV, Fedora Core & ATrpms documentation:
MythTV Searchable Mailing List Archive
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 186 bytes
Desc: This is a digitally signed message part
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20040601/4edfa71f/PGP.pgp
More information about the mythtv-users