[mythtv-users] PVR 250 and channels
Eric
mythlist at frederiksen.nu
Thu Jun 10 18:02:41 EDT 2004
Hi Jesper!
The settings in Mythtv seems correct, provided the pvr250 turns up as
/dev/video0. I live Sweden and had some problems setting up the channels
(I've a local cable provider) as I only knew the frequency, not the
channel number. This is basically what I did:
1) Check the frequencies.c and frequencies.h source files to match
frequency to channel number.
2) Initialize the pvr250 using test_ioctl:
# Set input to tuner 0
test_ioctl -d /dev/video0 -p 4
# Set video standard to PAL
test_ioctl -d /dev/video0 -u 0xff
# Set video resolution to full PAL
test_ioctl -d /dev/video0 -f width=720,height=576
# Set the msp3400
test_ioctl -d /dev/video0 -v input=3,output=1
3) Tune to a channel by using ptune.pl either with the frequency (in khz):
ptune.pl --input /dev/video0 --frequency 203000
or by using the channel number:
ptune.pl --input /dev/video0 --freqtable pal-europe --channel E9
4) Now you should be able to capture some video by doing
mplayer /dev/video0
Hope this helps!
I've spent a couple of weeks googling to get my box up and running but
it was totally worth the time.
To Isaac and the developers: This software rocks, great work!
Jesper FA wrote:
>I bought a PVR 250 and wanted to use it with myth.
>I have got the drivers loaded and it seems to work.
>I have configured myth with the card using /dev/video0 and /dev/vbi0. Sound I
>can only choose /dev/dsp is that right? I have selected default input as
>Tuner 0. The problem is all I get is static noise. I live in Denmark so I
>have tried setting frequencies manually. I have tried different numbers but
>no change. Btw. is it in MHz your are setting the frequency
>
>I have also tried playing /dev/video0 with mplayer and use ivtvctl to set
>frequency. Still only static. I have tried the cable in use on a TV and the
>signal is fine.
>
>In dmesg I get the following errors. Does they matter?
>ivtv: i2c client addr: 0x61 not found!
>ivtv: i2c client addr: 0x40 not found!
>
>I guess maybe the problem is that mythbackend writes the following when I try
>to change channel.
>...
>2004-06-10 22:23:39 CheckChannel failed. Please verify channel "68" in the
>"setup" Channel Editor.
>2004-06-10 22:23:39 CheckChannel failed. Please verify channel "69" in the
>"setup" Channel Editor.
>2004-06-10 22:23:39 CheckChannel failed. Please verify channel "E2" in the
>"setup" Channel Editor.
>2004-06-10 22:23:39 Error, couldn't find any available channels.
>2004-06-10 22:23:39 Your database is most likely setup incorrectly.
>
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
More information about the mythtv-users
mailing list