[mythtv-users] one IR receiver to rule them all?
Scott Rowe
mythgnomer at rowelab.com
Sat Mar 6 23:16:46 EST 2004
Hrmm.. Okay.. I think there's a misunderstanding here. The _receiver_
attached to the PVR-x50 is just that.. A receiver. It can't control another
device like a dish network receiver. You'd need a _transmitter_ or a
_transceiver_ (both receiver and transmitter) to send IR to another device.
That being said, some folks (myself included) have been able to control
multiple cable boxes using a serial cable to each of the cable boxes. Now,
one remote pointed at either PVR-x50 can control the whole system. That's
not to say you'd want to set them both up. You only need one _receiver_ to
control any number of systems. The control of a cable box and IR reception
are most often _not_ tied together.
-Scott Rowe
-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Mike Jasper
Sent: Saturday, March 06, 2004 7:04 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] one IR receiver to rule them all?
>>Should be a simple question for someone to answer:
>>
>>I'll have two PVR-250s, fed by two Dish Network receivers. Can a
>>single IR receiver + a single remote be used to control both tuners,
>>plus other stuff (MythGame, MythMusic, etc)?
>>
>
> I've got a PVR-350 and a 250, and I'm using just the 350's remote to
> control everything. Works like a charm.
Cool. Could you or anyone else elaborate on how to do this? Am I correct
that you have an IR receiver attached to each PVR-x50 card, but you're using
one remote to send different signals to each IR receiver?
So tell me if I have this right: I'll have two PVR-250's, each with it's
own (included) IR receiver attached. I'll be able to control both receivers
with a single remote (I'd like to use the universal remote that came with my
NAD surround receiver - is that possible?). I'll also need an IR blaster to
control the two Dish receivers from Myth, right?
Can a single IR blaster be shared across two PVR-250's?
So many questions...sorry! Thanks for any help.
--Mike
More information about the mythtv-users
mailing list