[mythtv-users] ATC-620 front logo

[Dan Morphis]

http://www.cwlinux.com/eng/products/products_cw12232.php

I got the black one, keypad, usb.  If you get this (either the usb or 
serial) let me know; the drivers they have listed on their site have a 
bug and you have to dig around to get the right ones.  Plus, I patched 
mine.  They had it set in the lcdproc driver to only return the buttons 
for the arrows, which keeps w/ what buttons lcdproc expects.  I have it 
set to return all button presses and it works great.

If you go w/ the usb and have an internal usb pin header let me know.  I 
bought the bracket to bring the internal usb to the outside of the case 
and canabalized one of the connectors on it so I don't have to run the 
cable for the lcd outside of the case.  If you pay for postage, I would 
gladly ship you the other one as I have no need for it.

-dan

Matt wrote:

>I have the ATC-620 and like it alot, but had to dissconnect the POWER 
>and HD leds on the front...
>
>Dan ,the one with the LCD :), can you post a link to the LCD you have 
>in this case. I have been looking for an LCD but am unsure what LCD 
>would work in this case.
>
>-Matt
>www.mattsshack.com
>
>  
>
>>Whoops.. nevermind.. should have looked at the other posts.
>>
>>-----Original Message-----
>>From: Dan Morphis [mailto:dan at milkcarton.com]
>>Sent: Wednesday, March 10, 2004 6:33 PM
>>To: Discussion about mythtv
>>Subject: Re: [mythtv-users] ATC-620 front logo
>>
>>
>>Dan, w/ the non-removable drive bays, did you figure out a way to 
>>    
>>
>screw 
>  
>
>>in the non-exposed side to your dvd drive?  I have the same case, 
>>    
>>
>and 
>  
>
>>for my dvd drive it really isn't an issue, but for my lcd panel, the 
>>non-exposed side I haven't been able to figure out how to get it 
>>    
>>
>screwed 
>  
>
>>in so when I push buttons on the display it flexes. . .
>>
>>-dan
>>
>>Dan Conti wrote:
>>    
>>
>>>They are good stuff. I have the 610 (i think) and have been really 
>>>      
>>>
>happy.
>  
>
>>>The only things i wasn't keen on -
>>>
>>>* No detachable drive bay, so it's a bit tricky to get the drives 
>>>      
>>>
>in
>  
>
>>>(since you have to do it after the mb is in)
>>>* Cable wiring for the front panel wasn't optimal, i think i 
>>>      
>>>
>managed to
>  
>
>>>run most of them out of the way and in a couple spots under the mb
>>>* It is nearly impossible to get a silent 60mm case fan; i ended up
>>>disconnecting the internal fan and removing it (leaving the 
>>>      
>>>
>grill). I have
>  
>
>>>not had temp problems (athlon 1800+, zalman 5100-cu, and a low 
>>>      
>>>
>noise PSU)
>  
>
>>>I bought a pioneer slot loading dvd drive for it, and have been 
>>>      
>>>
>super
>  
>
>>>happy overall, but getting it set up had some gotchas.
>>>
>>>-Dan
>>>
>>>      
>>>
>>
>>
>>Bausch & Lomb
>>150 Years of Perfecting Vision, Enhancing Life (TM)
>>
>>
>>
>>
>>
>>
>>EMAIL DISCLAIMER 
>>
>>Please Note: The information contained in this message may be 
>>    
>>
>privileged and
>  
>
>>confidential, protected from disclosure, and/or intended only for 
>>    
>>
>the use of
>  
>
>>the individual or entity named above. If the reader of this message 
>>    
>>
>is not
>  
>
>>the intended recipient, or an employee or agent responsible for 
>>    
>>
>delivering
>  
>
>>this message to the intended recipient, you are hereby notified that 
>>    
>>
>any
>  
>
>>disclosure, distribution, copying or other dissemination of this
>>communication is strictly prohibited. If you received this 
>>    
>>
>communication in
>  
>
>>error, please immediately reply to the sender, delete the message and
>>destroy all copies of it.
>>
>>Thank You
>>
>>_______________________________________________
>>mythtv-users mailing list
>>mythtv-users at mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
>>    
>>
>
>  
>