[mythtv-users] Dual VGA nVidia setup (was: The sub $500 mythbox)
Jarod Wilson
jcw at wilsonet.com
Wed Nov 3 03:05:16 UTC 2004
On Tuesday 02 November 2004 18:36, David W Davis wrote:
> Yan,
>
> Can you point me to someplace or post your xf86config for getting dual
> vga to work? I've got a geforce4 mx4000 and I can not get the dual
> vga out working. I've read all kinds of things on the net and tried
> multiple example configs but have been unsuccessful. Any advice would
> be appreciated.
Here's mine from my workstation at work, works like a charm. Its for dual
1280x1024 LCDs hooked to a single GeForce FX 5200 (but almost criminally, by
VGA and not DVI -- its the video card at fault):
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
#Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell 1901FP (Analog)"
DisplaySize 380 310
#HorizSync 30.0 - 80.0
HorizSync 60.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Dell"
BoardName "NVIDIA GeForce FX 5200"
Option "UseEdidFreqs" "1"
Option "FlatPanelProperties" "Scaling = centered, Dithering =
enabled"
Option "RenderAccel" "1"
Option "NvAGP" "1"
Option "HWCursor" "1"
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "2"
Option "TwinView" "1"
Option "MetaModes" "1280x1024,1280x1024; 1280x960,1280x960"
Option "ConnectedMonitor" "CRT,CRT"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "60.0"
Option "SecondMonitorVertRefresh" "56.0 - 76.0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768"
"800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
> Sorry to thread hijack......
Bad dog, no biscuit...
--
Jarod C. Wilson, RHCE
jcw at wilsonet.com
Got a question? Read this first...
http://catb.org/~esr/faqs/smart-questions.html
MythTV, Fedora Core & ATrpms documentation:
http://wilsonet.com/mythtv/
MythTV Searchable Mailing List Archive
http://www.gossamer-threads.com/lists/mythtv/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20041102/04e16619/attachment.pgp
More information about the mythtv-users
mailing list