[mythtv-users] Sound issues

[Brad Benson]

I'm still using Fedora Core 1, but try changing the post-install line to this:

below bttv tuner videodev

Similarly, 'above bttv tuner videodev' would modprobe tuner and
videodev before the bttv module.

Hope that helps.


On Mon, 29 Nov 2004 17:37:57 -0600, dargus at ou.edu <dargus at ou.edu> wrote:
> I've installed MythTV on Fedora Core 2 using apt. I'm using a cheap WinTV-Go card. When I first installed it everything was working fine but there was no sound. This is not a patch cable issue because I plugged my speakers directly into the TV card. I ran the ftvco script to automatically write my modprobe.conf entry and after changing modprobe.conf the sound worked. Now a couple of reboots later with no changes the sound is gone again. I'm fairly familiar with Linux but I have no idea what the problem could be. Is there a command I can use to turn the sound on manually? I'm including my modprobe.conf entries because I'm recieveing an error on the line "post-install bttv modprobe tuner; modprobe videodev". I don't really know enough about modprobe.conf to determine what the error is. Any help in solving this problem would be greatly appreciated.
>     -Dargus
> 
> # i2c
> alias char-major-89 i2c-dev
> options i2c-core i2c_debug=1
> options i2c-algo-bit bit_test=1
> 
> # bttv
> alias char-major-81 videodev
> alias char-major-81-0 bttv
> options bttv card=10 pll=0
> options tuner type=8 debug=0
> options msp3400 once=1 simple=1
> post-install bttv modprobe tuner; modprobe videodev
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>