[mythtv-users] Capture Problems (Leadtek Winfast 200XP Deluxe)
nate s
nate.strickland at gmail.com
Sat Oct 16 19:16:15 UTC 2004
I believe I have the same card as you.
For bttv vs cx88, it depends on what card you have; the delux is bttv,
the expert is cx88.
Does video work in tvtime or xawtv?
-Nate
On Fri, 15 Oct 2004 15:54:03 -0400, Brad Bonkoski
<bbonkosk at tampabay.rr.com> wrote:
>
> I have read some general discussion about using the bttv driver versus the
> ct8xx driver. Currently I have had the best 'apparent' luck with the bttv
> driver. Here is my dmesg output:
> server root # dmesg | grep bttv
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 9, latency: 32, mmio: 0xde000000
> bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is
> 107d:6606
> bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
> bttv0: using tuner=2
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv0: add subdevice "remote0"
> bttv0: PLL can sleep, using XTAL (28636363).
>
> Does this look like the device driver is being properly loaded, and the
> device properly registered?
> When I run myth and try to watch TV, I just get a green screen and nothing
> else.
> Any ideas on where to start.
>
> Thanks
> -brad
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
More information about the mythtv-users
mailing list