[mythtv-users] My successful setup, with some issues

[Tim Litwiller]

>> Each time I boot the machine, it complains about CMOS
>> corruption and resets to defaults.  Occassionally the message will be
>> that the CPU has been changed.  If I actually try to set anything in
>> the CMOS setup (even just the time and date), it will not reboot until
>> I use the jumper to reset the CMOS.  I tried replacing the battery
>> with no effect (symptoms are unchanged)

...

>>CMOS settings are fine for it, this is more of an annoyance and not a
>>show stopper... but does anyone have a clue as to what might be wrong?
> 
> Do you have a spare power supply. 


That is what I what I would suggest also. - I have seen exactly those 
same symptoms - tho not on that board - that where fixed by a better 
power supply.