[mythtv-users] OT: Nvidia FX 5200 no TV out (or twin view)
john salch
jsalch at yahoo.com
Thu Oct 21 12:43:38 UTC 2004
did you try the XF86 file i sent out a few days ago?
in that file I have montitor plugged into VGA and TV
into SVideo.
--- Ryszard <ryszard99 at gmail.com> wrote:
> A little more on the issue using the below config, i
> see the nvidia
> logo appear on the TV (but not on the monitor),
> however when i take TV
> out of the connected monitors section, everything
> works, ie X starts
> up on the monitor, not the TV).
>
> the error/exit message i get is the same as the one
> posted above.
>
> -------8<----------------
> john:~# cat /etc/X11/XF86Config-4
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file)
> generated by dexconf, the
> # Debian X Configuration tool, using values from the
> debconf database.
> #
> # Edit this file with caution, and see the
> XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # If you want your changes to this file preserved by
> dexconf, only make changes
> # before the "### BEGIN DEBCONF SECTION" line above,
> and/or after the
> # "### END DEBCONF SECTION" line below.
> #
> # To change things within the debconf section, run
> the command:
> # dpkg-reconfigure xserver-xfree86
> # as root. Also see "How do I add custom sections
> to a dexconf-generated
> # XF86Config or XF86Config-4 file?" in
> /usr/share/doc/xfree86-common/FAQ.gz.
>
> Section "Files"
> FontPath "unix/:7100"
> # local font server
> # if the local font server has problems, we
> can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath
> "/usr/lib/X11/fonts/cyrillic"
> FontPath
> "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath
> "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> #Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> #Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device"
> "/dev/psaux"
> Option "Protocol"
> "ImPS/2"
> Option "Emulate3Buttons"
> "true"
> Option "ZAxisMapping" "4
> 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents"
> "true"
> Option "Device"
> "/dev/input/mice"
> Option "Protocol"
> "ImPS/2"
> Option "Emulate3Buttons"
> "true"
> Option "ZAxisMapping" "4
> 5"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "27in Analog TV"
> HorizSync 30.0 - 50.0
> VertRefresh 60.0 - 60.0
> Option "dpms"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
>
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1280x1024"
> "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1280x1024"
> "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1280x1024"
> "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1280x1024"
> "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1280x1024"
> "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Screen0"
>
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> #InputDevice "LIRC-Mouse"
> EndSection
>
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> VendorName "Chaintech"
> BoardName "nVidia GeForce FX 5200"
> Option "RenderAccel" "1"
>
> # TV Out Setup
> Option "TwinView"
> Option "SecondMonitorHorizSync" "30-50"
> Option "SecondMonitorVertRefresh" "60"
> Option "MetaModes" "1280x1024, 800x600"
> Option "TwinViewOrientation" "Clone"
> Option "ConnectedMonitor" "CRT, TV"
> Option "TVStandard" "PAL-B"
> Option "TVOutFormat" "SVIDEO"
>
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
> -------8<----------------
> > _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
>
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list