[mythtv-users] ivtv not recognizing second card due to bus mastering?!

Mon Sep 27 19:23:29 EDT 2004

Hi,

strangest problem... when ivtv loads up it recognizes my first pvr-250 ok,
but the second one fails due to "error -6" the bus mastering error. Now I
browsed through my BIOS but I can't set bus mastering for every pci slot (I
have only 2 by the way), I can just enable and disbale PCI bus mastering as
a whole. So why would my first card work and my second card won;t? Any
ideas? I'm clueless. I've included my log.

Thanks in advance,

Kees.

Sep 27 01:14:00 localhost kernel: ivtv: ==================== START INIT IVTV
====================
Sep 27 01:14:00 localhost kernel: ivtv: version 0.1.10 (0.1.10pre2-ck108k)
loading
Sep 27 01:14:00 localhost kernel: ivtv: Linux version: 2.6.8-1.521 686
REGPARM 4KSTACKS gcc-3.3
Sep 27 01:14:00 localhost kernel: ivtv: In case of problems please include
the debug info
Sep 27 01:14:00 localhost kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Sep 27 01:14:00 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Sep 27 01:14:00 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Sep 27 01:14:00 localhost kernel: ivtv: Found an iTVC16 based chip
Sep 27 01:14:00 localhost kernel: PCI: Found IRQ 5 for device 0000:00:09.0
Sep 27 01:14:00 localhost kernel: ivtv: XXX PCI device: 0x0730 vendor:
0x1039
Sep 27 01:14:00 localhost kernel: tveeprom: Hauppauge: model = 32034, rev =
B148, serial# = 6913710
Sep 27 01:14:00 localhost kernel: tveeprom: tuner = LG TP18PSB11D (idx = 48,
type = 29)
Sep 27 01:14:00 localhost kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom =
0x04, v4l2 = 0x00000007)
Sep 27 01:14:00 localhost kernel: tveeprom: audio_processor = MSP3415 (type
= 6)
Sep 27 01:14:00 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok]
Sep 27 01:14:01 localhost kernel: ivtv: Tuner Type 29, Tuner formats
0x00000007, Radio: yes, Model 0x00891518, Revision 0x00000000
Sep 27 01:14:01 localhost kernel: ivtv: PAL tuner detected
Sep 27 01:14:01 localhost kernel: ivtv: Radio detected
Sep 27 01:14:01 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Sep 27 01:14:01 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Sep 27 01:14:01 localhost kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Sep 27 01:14:01 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Sep 27 01:14:01 localhost kernel: saa7115: writing init values
Sep 27 01:14:01 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok]
Sep 27 01:14:01 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Sep 27 01:14:01 localhost kernel: msp34xx: ivtv version
Sep 27 01:14:01 localhost kernel: msp34xx: init: chip=MSP3415G-B8, has NICAM
support, simple (D) mode, simpler (G) no-thread mode
Sep 27 01:14:01 localhost kernel: msp34xx: $Id$ compiled on: Sep  9 2004
17:13:54
Sep 27 01:14:01 localhost kernel: ivtv: i2c attach [client=MSP3415G-B8,ok]
Sep 27 01:14:02 localhost kernel: ivtv: Encoder revision: 0x02040011
Sep 27 01:14:02 localhost kernel: ivtv: Configuring WinTV PVR 250 card with
5 streams
Sep 27 01:14:02 localhost kernel: ivtv: Create DMA stream 0 using 16 131072
byte buffers  2097152 kbytes total
Sep 27 01:14:02 localhost kernel: ivtv: Registered v4l2 device, streamtype 0
minor 0
Sep 27 01:14:02 localhost kernel: ivtv: Create DMA stream 1 using 16 131072
byte buffers  2097152 kbytes total
Sep 27 01:14:02 localhost kernel: ivtv: Registered v4l2 device, streamtype 1
minor 32
Sep 27 01:14:02 localhost kernel: ivtv: Create stream 2 using 512 4096 byte
buffers  2097152 kbytes total
Sep 27 01:14:02 localhost kernel: ivtv: Registered v4l2 device, streamtype 2
minor 224
Sep 27 01:14:02 localhost kernel: ivtv: Create DMA stream 3 using 16 131072
byte buffers  2097152 kbytes total
Sep 27 01:14:02 localhost kernel: ivtv: Registered v4l2 device, streamtype 3
minor 24
Sep 27 01:14:02 localhost kernel: ivtv: Create stream 4
Sep 27 01:14:02 localhost kernel: ivtv: Registered v4l2 device, streamtype 4
minor 64
Sep 27 01:14:02 localhost kernel: ivtv: Setting Tuner 29
Sep 27 01:14:02 localhost kernel: tuner: type set to 29 (LG PAL_BG
(TPI8PSB11D)) by ivtv i2c driver #0
Sep 27 01:14:02 localhost kernel: ivtv: Setting audio matrix to input 3,
output 1
Sep 27 01:14:02 localhost kernel: ivtv: Switching standard to PAL.
Sep 27 01:14:02 localhost kernel: saa7115: decoder set norm PAL
Sep 27 01:14:03 localhost kernel: saa7115: set audio: 0x01
Sep 27 01:14:03 localhost kernel: ivtv: Initialized WinTV PVR 250, card #0
Sep 27 01:14:03 localhost kernel: ivtv: Autodetected WinTV PVR 250 card
Sep 27 01:14:03 localhost kernel: ivtv: Found an iTVC16 based chip
Sep 27 01:14:03 localhost kernel: PCI: Enabling device 0000:00:0b.0 (0000 ->
0002)
Sep 27 01:14:03 localhost kernel: PCI: Found IRQ 3 for device 0000:00:0b.0
Sep 27 01:14:03 localhost kernel: PCI: Sharing IRQ 3 with 0000:00:01.1
Sep 27 01:14:03 localhost kernel: ivtv: Bus Mastering is not enabled
Sep 27 01:14:03 localhost kernel: ivtv: Error -6 on initialization
Sep 27 01:14:03 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card: probe of
0000:00:0b.0 failed with error -6
Sep 27 01:14:03 localhost kernel: ivtv: ====================  END INIT IVTV
====================

>
> ----- Original Message ----- 
> From: "Pascal Hos" <pascalhos at gmail.com>
> To: "Bryce Tennant" <btek at rochester.rr.com>
> Cc: "Discussion about mythtv" <mythtv-users at mythtv.org>
> Sent: Sunday, September 26, 2004 1:00 PM
> Subject: Re: [mythtv-users] Problems filling database
>
>
> > Thanks for replying. I thought I was the only one stuck with this
> > problem. No I have not resolved this problem. When you say "I ran
> > mythbackend and told it to wip out my channel database" do you mean
> > you ran mythtvsetup and answered yes to clear channel data?
> >
> >
> > On Sat, 25 Sep 2004 14:28:06 -0400, Bryce Tennant
<btek at rochester.rr.com>
> wrote:
> > > Did you get this issue resolved? I was seeing the same issue and I
> rebuilt my
> > > channel database which seems to have fixed the problem. I ran
> mythbackend and
> > > told it to wip out my channel database. Once that was complete I reran
> > > mythfilldatabase. Everything appears to work now.
> > >
> > >
> > >
> > >
> > > On Tuesday 21 September 2004 02:37 am, Pascal Hos wrote:
> > > > I have just set up a FC2 system based on Jarod's guide (Thanks for
> > > > that!). I now have a problem which I see other have as well but I
have
> > > > not seen a solution.
> > > >
> > > > I am not able to fill the database with listings. I get the
> > > > following output when running mythfilldatabase --manual:
> > > >
> > > > ### New channel found
> > > > ###
> > > > ### name = Nederland 1
> > > > ### callsign =
> > > > ### channum =
> > > > ### finetune =
> > > > ### tvformat =
> > > > ### icon = /home/mythtv/.mythtv/channels/ned1.png
> > > > ###
> > > > Choose a channel ID (positive integer) [0] 1
> > > > Choose a channel name (any string, long version) [Nederland 1]
> > > > Choose a channel callsign (any string, short version) ned1
> > > > Choose a channel number (just like xawtv) E9
> > > > Choose a channel fine tune offset (just like xawtv)
> > > > Choose a TV format (PAL/SECAM/NTSC/ATSC/Default)
> > > > Choose a channel icon image (any path name)
> > > > [http://xmltv.fambus.nl/logos/ned1.png]
> > > > Query was:
> > > > SELECT chanid,name,callsign,channum,finetune,icon,freqid,tvformat
FROM
> > > > channel WHERE xmltvid = "1.tvgids.nl" AND sourceid = 1;
> > > > No error type from QSqlError? Strange...
> > > >
> > > > This happens for every channel. Then after entering all the info I
get
> > > > the following:
> > > >
> > > > Unknown xmltv channel identifier: 1.tvgids.nl
> > > > Skipping channel.
> > > > Adjusting program database end times...
> > > > 0 replacements made.
> > > >
> > > > When running mythfrontend I keep seeing the following error:
> > > > QDateTime::fromString: Parameter out of range
> > > >
> > > > and another clear sign that something is wrong:
> > > > metadata.o: Your database is out of whack. This is not good.
> > > >
> > > > And when trying to run mythmusic I get the following:
> > > > QObject::connect: No such slot
> > > > PlaybackBox::handleTreeListSignals(int,IntVector*)
> > > > QObject::connect: (sender name: 'musictreelist')
> > > > QObject::connect: (receiver name: 'music_playback')
> > > > QObject::connect: No such slot PlaybackBox::previous()
> > > > QObject::connect: (sender name: 'prev_button')
> > > > QObject::connect: (receiver name: 'music_playback')
> > > > ..................
> > > >
> > > > I am not familiar enough with MySQL to start playing around with it
> > > > myself. Is there anyone who was having these problems and has now
> > > > solved it?
> > >
> >
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>