[mythtv-users] Picture moved off --> right in 1920 HD modes ???
Jonathan Watmough
jonathan.watmough at gmail.com
Tue Apr 5 17:55:50 UTC 2005
Yeah, I thought it was doing the right thing too. Adding the
DisplaySize line to my xorg.conf didn't do anything other than change
the way the fonts looked on the TV.
I'm using the 66(29?) Nvidia drivers on a comodity 5200 card.
My xorg.conf looks like ... see following..
I did have a look through the output below but I couldn't see anything
that looked suspicious compared to running on my flat panel at
800x600. I'll keep looking.
Thanks
Jonathan
xorg.conf :
<blockquote>
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
# Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse[0]"
Driver "mouse"
Option "Protocol" "evdev"
Option "Dev Name" "Logitech USB Receiver" # cat /proc/bus/input/devices
#Option "Dev Phys" "usb-0000:00:1d.0-2/input0" # cat /proc/bus/input/devices
Option "Device" "/dev/input/mice" # (/dev/input/mice also appears to work)
Option "Buttons" "12"
Option "ZAxisMapping" "11 12"
Option "Resolution" "800"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-50
VertRefresh 60
DisplaySize 400 300
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
Option "NvAGP" "1" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" "TV" # <str>
#Option "ConnectedMonitors" # <str>
# TV Out Setup
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
Option "RenderAccel" "true" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
Option "TVOverScan" "0.0" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600"
EndSubSection
EndSection
</blockquote>
On Apr 5, 2005 5:48 AM, Doug Larrick <doug at ties.org> wrote:
> Jonathan Watmough wrote:
> > Hi
> >
> > The picture through my TV out is displayed off to the right with a
> > black border on the left. This only happens on my TV at 800x600 or
> > 640x480, when displaying 1920x1080 HD content.
> >
> > A monitor at 800x600 is fine, and regular HD 1280 content is fine.
>
> <snip>
>
> > DisplayAspect: 1.334975
> > VideoAspect(1.777778)
> > XJ_aspect(1.777778)
> > CDisplayAspect: 1.333333
> > Letterbox: 0
> > 2005-04-05 00:05:25.151 Image size. dispxoff 0, dispyoff: 75,
> > dispwoff: 800, disphoff: 450
> > 2005-04-05 00:05:25.151 Image size. imgx 0, imgy: 0, imgw: 1920, imgh: 1080
> > GetVisibleSize: xoff=0 yoff=0 width=1920 height=1080
>
> Looks like Myth is doing the right thing here (an 800x450-pixel image at
> offset of (0,75). I'd think this is an Xv issue with your video driver.
> Mythfrontend shows up fine? And you don't have the separate modes for
> video playback (frontend setting) enabled? What's your video card and
> the driver version (if ATI or nVidia)?
>
> -Doug
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
>
More information about the mythtv-users
mailing list