[mythtv-users] Need Help with FC3 pcHDTV HD-3000 Install

Tue Apr 5 19:21:05 UTC 2005

I'd recommend a reboot between 'make install' and 'modprobe
cx88-dvb'... this will ensure that old versions of drivers which
should have been replaced by the newly compiled drivers are unloaded
and the new ones are loaded.

Good luck,
Adam

On Apr 3, 2005 6:55 PM, SacTwoThirtyEight <sac238 at yahoo.com> wrote:
>  
>  
>  
>  
>  
> 
> I have been unsuccessful still in trying to load the DVB drivers for my
> pcHDTV-3000.  What I have done so far is: Download the drivers for the
> pcHDTV from their website (using the latest 2.0 drivers). Installed the DVB
> programs as per Mr. Sturgeon's instructions to add azap 
> 
>             Those instructions dictated to got to kernel 2.6.11 
> 
>             I also upgraded to lastest nVidia 7174 drivers 
> 
>             Now when I try to install the pcHDTV drivers,  I do the "make",
> "make install" and "make udev". Below are the results for the make, make
> install, modprobe cx88-dvb and dmesg 
> 
> If anyone has any ideas, they would be greatly appreciated.  Thanks in
> advance. (Sorry for the long logs ... better to be complete than miss
> something important) 
> 
>   
> 
> MythTV.019 
> 
> FC3-kernel 2.6.11 
> 
> Asus P5AD2 Premium Motherboard 
> 
> Pentium 540 3.2GHz LGA775 
> 
> 1GB of DDR2 RAM 
> 
>  Gigabyte nVidia 6600GT RT pci-16x 
> 
>  pcHDTV-3000 
> 
>   
> 
>   
> 
> [@localhost pcHDTV-2.0]# make 
> 
> make -C /lib/modules/2.6.11/build SUBDIRS=/pcHDTV-2.0 modules 
> 
> make[1]: Entering directory `/usr/src/linux-2.6.11' 
> 
>   Building modules, stage 2. 
> 
>   MODPOST 
> 
> make[1]: Leaving directory `/usr/src/linux-2.6.11' 
> 
> [@localhost pcHDTV-2.0]# make install 
> 
> strip --strip-debug bt878.ko btcx-risc.ko bttv.ko cx22702.ko cx24110.ko
> cx8800.k 
> 
> o cx8801.ko cx8802.ko cx88-atsc.ko cx88-blackbird.ko cx88-dvb.ko cx88xx.ko
> dst.k 
> 
> o dvb-bt8xx.ko dvb-core.ko dvb-pll.ko ir-common.ko ir-kbd-gpio.ko
> ir-kbd-i2c.ko 
> 
> msp3400.ko mt352.ko nxt6000.ko or51132.ko or51211.ko saa6752hs.ko
> saa7134-dvb.ko 
> 
>  saa7134-empress.ko saa7134.ko sp887x.ko tda1004x.ko tda9887.ko tuner.ko
> tvaudio 
> 
> .ko tveeprom.ko tvmixer.ko v4l1-compat.ko v4l2-common.ko video-buf-dvb.ko
> video- 
> 
> buf.ko 
> 
> <deleted for space> 
> 
> `videodev2.h' -> `/usr/include/linux/videodev2.h' 
> 
> `videodev.h' -> `/usr/include/linux/videodev.h' 
> 
> su -c "patch -Np0 /usr/include/linux/videodev2.h <videodev2-patch" 
> 
> patching file /usr/include/linux/videodev2.h 
> 
> su -c "./scripts/patch_modprobe.sh" 
> 
> [@localhost pcHDTV-2.0]# modprobe cx88-dvb 
> 
> WARNING: Error inserting video_buf_dvb
> (/lib/modules/2.6.11/v4l2/video-buf-dvb.k 
> 
> o): Unknown symbol in module, or unknown parameter (see dmesg) 
> 
> WARNING: Error inserting video_buf_dvb
> (/lib/modules/2.6.11/v4l2/video-buf-dvb.k 
> 
> o): Unknown symbol in module, or unknown parameter (see dmesg) 
> 
> FATAL: Error inserting cx88_dvb (/lib/modules/2.6.11/v4l2/cx88-dvb.ko):
> Unknown 
> 
> symbol in module, or unknown parameter (see dmesg) 
> 
> FATAL: Error running install command for cx88_dvb 
> 
> ============================= 
> 
>   
> 
>   
> 
> [@localhost ~]# dmesg 
> 
> ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 193 
> 
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193]  MMIO=[d2cef000-d2cef7ff]
>  Max Packet=[4096] 
> 
> md: Autodetecting RAID arrays. 
> 
> md: autorun ... 
> 
> md: ... autorun DONE. 
> 
> NET: Registered protocol family 10 
> 
> Disabled Privacy Extensions on device c03a33a0(lo) 
> 
> IPv6 over IPv4 tunneling driver 
> 
> ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000c3235a] 
> 
> nvidia: module license 'NVIDIA' taints kernel. 
> 
> ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 217 
> 
> PCI: Setting latency timer of device 0000:05:00.0 to 64 
> 
> NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22
> 06:44:39 PST 2005 
> 
> ACPI: Power Button (FF) [PWRF] 
> 
> ibm_acpi: ec object not found 
> 
> EXT3 FS on sda2, internal journal 
> 
> cdrom: open failed. 
> 
> kjournald starting.  Commit interval 5 seconds 
> 
> EXT3 FS on sda1, internal journal 
> 
> EXT3-fs: mounted filesystem with ordered data mode. 
> 
> SGI XFS with ACLs, security attributes, large block numbers, no debug
> enabled 
> 
> SGI XFS Quota Management subsystem 
> 
> Adding 1574360k swap on /dev/sda3.  Priority:-1 extents:1 
> 
> parport: PnPBIOS parport detected. 
> 
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] 
> 
> Trying to free free DMA3 
> 
> pnp: Device 00:06 disabled. 
> 
> ip_tables: (C) 2000-2002 Netfilter core team 
> 
> ip_tables: (C) 2000-2002 Netfilter core team 
> 
> ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 193 
> 
> eth0: no IPv6 routers present 
> 
> pnp: Device 00:06 activated. 
> 
> parport: PnPBIOS parport detected. 
> 
> pnp: Device 00:06 disabled. 
> 
> lp: driver loaded but no devices found 
> 
> cx88[0]/2: atsc_open - device data 
> 
> cx88[0]/2: device minor 1 
> 
> cx88[0]/2: tuner_type 52 
> 
> program python is using a deprecated SCSI ioctl, please convert it to SG_IO 
> 
> kobject_register failed for dvb_core (-17) 
> 
>  [<c01d0e71>] kobject_register+0x51/0x60 
> 
>  [<c013a5f8>] mod_sysfs_setup+0x58/0xb0 
> 
>  [<c013b970>] load_module+0xa00/0xae0 
> 
>  [<c013baa8>] sys_init_module+0x58/0x220 
> 
>  [<c010405d>] sysenter_past_esp+0x52/0x75 
> 
> video_buf_dvb: disagrees about version of symbol dvb_dmx_release 
> 
> video_buf_dvb: Unknown symbol dvb_dmx_release 
> 
> video_buf_dvb: disagrees about version of symbol dvb_dmx_swfilter 
> 
> video_buf_dvb: Unknown symbol dvb_dmx_swfilter 
> 
> video_buf_dvb: disagrees about version of symbol dvb_dmx_init 
> 
> video_buf_dvb: Unknown symbol dvb_dmx_init 
> 
> kobject_register failed for dvb_core (-17) 
> 
>  [<c01d0e71>] kobject_register+0x51/0x60 
> 
>  [<c013a5f8>] mod_sysfs_setup+0x58/0xb0 
> 
>  [<c013b970>] load_module+0xa00/0xae0 
> 
>  [<c013baa8>] sys_init_module+0x58/0x220 
> 
>  [<c010405d>] sysenter_past_esp+0x52/0x75 
> 
>  
> 
> <repeats over and over>  
> 
> 
> 
> John Sturgeon <mythtv at sturgeonfamily.com> wrote: 
> SacTwoThirtyEight wrote:
> 
> > First off, I'd like to thank everyone on their help so far. Here is 
> > where I'm at ...
> > If I load "modprobe cx8800" -- no errors and no signal. 
> > "modprobe cx88-dvb" -- no errors and no signal
> > "modprobe cx88-atsc" -- no errors and 92-98% signal.
> > 
> > The question now becomes can I use atsc in mythtv ? I thought it was 
> > preferred to use dvb because that will hopefully be more heavily 
> > supported in upcoming releases on mythtv. Anyone have any ideas on this ?
> >
> 
> You say no signal... How are you checking for a signal when cx88-dvb 
> drivers have loaded? You should follow the directions at 
> http://www.rsmas.miami.edu/personal/angel/mythtv/air2pc-howto.html
> and get azap. I don't think dtvsignal will work for the dvb drivers. 
> If at all possible, I would recommend sticking with cx88-dvb, it plays 
> nicer with MythTV.
> 
> --
> John Sturgeon <><
> http://www.sturgeonfamily.com/mythtv.php
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>  
> 
>  ________________________________
>  Do you Yahoo!?
> Better first dates. More second dates. Yahoo! Personals 
> 
>  
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>