[mythtv-users] OT: avidemux2 question

[James Pifer]

> Back before I got sp-diff audio working I was using the line out of the
> sound card and going into the line in of the external amplifier. I also
> found that the levels to be quite a bit lower than my other inputs. This
> leads me to think that there is a different standard between the two
> appliences. Or perhaps an impedance issue. My work-around was to turn up the
> mixers to about 90% on the myth box. This was less than perfect as you could
> hear some distortion on loud passages which I assume was the line-out amp
> hitting the rail. Not sure if your myth box has sp-diff or coax audio out
> but if it does, I would recommend that option. Otherwise you might end up
> building a little op-amp circuit to boost the signal level.
> 
> 

Well, I found a workaround. I don't know if others have had this
problem, but here's what I did. I had an old Fisher Equalizer. I stuck
that in between the MVP1000 and my Receiver. I then jacked all the bars
to the top. I think it raised it about 12db and now it's an acceptable
level. 

Thanks,
James