[mythtv-users] HELP Ati remote wonder on FC3

[Tim Litwiller]

For me it just worked like a second mouse in fedora core 2 3 and 4

and then follow the instructions from the LIRC section on my remote
wonder web page
http://www.litwiller.net/mythtv/remote.html

In Fedora core 3 and 4, I just put the /etc/modules.conf  lines near
the top of the modprobe.conf file

I need to edit that page it looks like.  I would appreciate someone
makeing/contributing a better ~/.mythtv/lircrc file that uses the
buttons better.


On 8/17/05, Ernie Lim <ml at itmm.ca> wrote:
> 
> 
> > -----Original Message-----
> > From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> > bounces at mythtv.org] On Behalf Of Jack Trout
> > Sent: Wednesday, August 17, 2005 5:37 PM
> > To: Discussion about mythtv
> > Subject: Re: [mythtv-users] HELP Ati remote wonder on FC3
> >
> > > find / -name ati_remote.ko -print
> > >
> > > then mv any of those to ~/
> > >
> > > You'll still need the appropriate lircd.conf and .lircrc.
> > >
> > > I found it hard to get the appropriate device file created (I'm using
> > > devfs) without rebooting.
> > >
> > > Graham
> > >
> >
> > Thank you, seems I missed one, I was being lazy and using updatedb &&
> > locate ati_remote, found 2 out of 3 kernel modules, just the current
> > kernel I was using was listed should have realized this,
> >
> > after that and a reboot, I have come to another blocking point
> >
> > when I start now, I have /dev/lirc0 which I assume now is meaning that
> > lirc has found my remote, but I have never setup lirc with a usb
> > reciever, for a serial reciever I know you can test it by catting the
> > serial port or lirc port and pressing buttons on your remote, when I
> > start lircd -d /dev/lirc0 --nodaemon &, then irw, I get no response,
> >
> > my lircd.conf file contains the whole lircd.conf.atiusb file, which
> > seems to contain a code set for every version of ati remotes, do I
> > only need to select one from the file and erase the rest?
> >
> > or is there something else I am missing my remote model is 5000023600
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> You only need the relevant section in your lircd.conf file. Also check your
> lircd log for clues.
> 
> Make sure irw is looking at the right device.. I believe the correct syntax
> is irw /dev/lirc0. I don't think it looks there by default??
> 
> Good luck.
> 
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>