[mythtv-users] DCT-6200 Firewire issue
drig at noses.org
Thu Dec 1 13:44:03 EST 2005
Unfortunately, my P2P connections are definitely not working correctly.
I tried your advice and connected the firewire cable into the other node
on the DCT box, but I still get nothing over broadcast, and the same
problems with P2P. There's a little history with my cable box. The
DCT-6412 is a DVR, which I don't need if I'm going to be using myth.
They gave it to me in error. So, I'll be bringing it back and getting a
straight 6200 and seeing if that works any better.
Thanks for your help!
Steve Adeff wrote:
> some boxes uses p2p instead of broadband, some boxes have one port set
> for p2p
>and one port set to broadband. the people that say to use bcast don't really
>know what they're talking about. if you have the ability, then yes, use it,
>if not, p2p is fine.
>the type of connection matters not, my box uses p2p without issue. I'm waiting
>for a compatible firewire card arrive in the mail from newegg before I hook
>it up to MythTV, but when testing with my laptop's built-in firewire I got
>100% channel changes correct and no record issues with test-mpeg. I wrote a
>script that would change the channel +1 run test-mpeg and if data was
>received write the channel and "ok" in a text file. This was so I could
>quickly figure out what channels were 5C'd for me, through the whole script I
>didn't run into a channel change error. I then played around with it (in awe
>that it actually worked of course) and again had no issues. all through p2p.
More information about the mythtv-users