[mythtv-users] Hardware is detected as Winfast TV2000 XP by Fedore core 3, in fact , but my hardware is Winfast PVR2000

[=?gb2312?B?wqzR1779?=]

Why? I got a PVR card name by Winfast PVR2000,some detail info as :

[root at root ~]# lspci -v
01:01.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
        Subsystem: LeadTek Research Inc.: Unknown device 663c
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

01:01.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
        Subsystem: LeadTek Research Inc.: Unknown device 663c
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2

[root at root lirc-0.7.2]# modprobe cx8800
[root at root lirc-0.7.2]# lsmod |more
[root at root Module                  Size  Used by
cx8800                 45149  0
cx88xx                 19397  1 cx8800
vfat                   14785  1
ir_common               4677  1
tuner                  18413  0
video_buf              21701  3 cx8800,cx88xx
i2c_algo_bit            8521  1 cx8800
v4l1_compat            11973  2 cx8800
v4l2_common             5953  2 cx8800
btcx_risc               4425  2 cx8800
videodev                9664  2 cx8800
i2c_core               22081  5 cx8800,cx88xx,tuner,i2c_algo_bit

[root at root lirc-0.7.2]# tail /var/log/messages
Dec 10 17:29:13 root kernel: cx2388x v4l2 driver version 0.0.4 loaded
Dec 10 17:29:13 root kernel: ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9
(level, low) -> IRQ 9
Dec 10 17:29:13 root kernel: cx8800[0]: found at 0000:01:01.0, rev: 5, irq: 9,
latency: 64, mmio: 0xfc 000000
Dec 10 17:29:13 root kernel: cx8800[0]: subsystem: 107d:663c, board: Leadtek
PVR 2000 [card=9,autodete cted]
Dec 10 17:29:13 root kernel: tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
Dec 10 17:29:13 root kernel: tuner: type set to 38 (Philips PAL/SECAM multi
(FM1216ME MK3)) by cx8800[ 0]
Dec 10 17:29:13 root kernel: cx8800[0]: i2c attach [client=Philips PAL/SECAM
multi (FM1216ME MK3)]
Dec 10 17:29:13 root kernel: cx8800[0]: i2c register ok
Dec 10 17:29:13 root kernel: cx8800[0]: registered device video0 [v4l2]
Dec 10 17:29:13 root kernel: cx8800[0]: registered device vbi0
[root at root lirc-0.7.2]#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051210/abb9d112/attachment.htm