[mythtv-users] AverMedia AverTV DVB-T card setup

[David Whyte]

Is yours a 761 model of the Avermedia?

I have two 771's which work brilliantly.  I remember reading that the
earlier model (which I can only now presume is a 761) is a biatch.

Look at the photos on my blog for pictures of the 771 and see if they
are the same...http://www.mtekk.com.au/blogs/dave/davesblog.html

Dave


On Fri, 7 Jan 2005 13:48:59 +1100, Barry Haycock
<Barry.Haycock at cybertrust.com> wrote:
> I am in the process of setting up my first mythtv box on
> FC2 with a 2.6.10 kernel. I am using AverMedia AverTV DVB-T as my card
> This according to my logging is being found and registered so my drivers
> are fine all of my drivers are built into the kernel as this box will do
> nothing but host my mythtv and media.
> 
> When I run setup what card type should I be using for my card. Looking
> at things I should be using the DVB setup but it doesn't find my card.
> 
> I have included the dvb in the build by editing the settings.pro file is
> there anything I have missed or have done wrong???
> 
> Syslog dump.
> Linux video capture interface: v1.00
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
> ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
> bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 11, latency: 32, mmio:
> 0xde000000
> bttv0: detected: AverMedia AverTV DVB-T [card=124], PCI subsystem ID is
> 1461:0761
> bttv0: using: AverMedia AverTV DVB-T 761 [card=124,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=009f00dd [init]
> bttv0: using tuner=-1
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv0: add subdevice "remote0"
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
> bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 11, latency: 32, memory:
> 0xde001000
> DVB: registering new adapter (bttv0).
> DVB: registering frontend 0 (Spase SP887x DVB-T)...
> 
> Barry Haycock
> 
> Barry Haycock
> T +61 2 6216 8905
> Cybertrust
> 243 Northbourne Ave
> Lyneham ACT 2602
> 
> There are 10 types of people in the world. Those that understand binary
> and those that don't.
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
> 


-- 
GMAIL is 'da bomb baby....YEAH