[mythtv-users] xorg.conf & 27" analog TV
M Smith
quaff at clippersoft.net
Sat Jan 22 12:07:50 EST 2005
Dan Littlejohn wrote:
> I have got my tv out display working pretty well, but it still has an
> odd problem that I cannot solve.
>
> When I am in the window manager (evilWM) or Myth the display has a pin
> cushion effect, which I expect is because I have a 10 year old analog
> TV. However, what I am concerned about is that when I am using just
> the window manager, about a minute after X starts, the display begins
> to have large blobs on the screen and it will lock up. It looks like
> the screen is being burnt which is obviously no good. I have tried
> different resolutions and other settings, but the problem persists. I
> have not been able to find out any specs on my TV. It is a 27
> Magnavox TX2753 C202 so I have just been using the standard ones.
>
> Here is my xorg.conf. Anyone have any tips?
>
> Thanks;
> Dan
>
> +++
>
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe" # Double buffer extension
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA extension
> EndSubSection
>
> # This loads the font modules
> Load "type1"
> Load "freetype"
> Load "glx"
> Load "record"
> Load "extmod"
> Load "xtrap"
>
>
> EndSection
>
> # **********************************************************************
> # Files section. This allows default font and rgb paths to be set
> # **********************************************************************
>
> Section "Files"
>
> # The location of the RGB database. Note, this is the name of the
> # file minus the extension (like ".txt" or ".db"). There is normally
> # no need to change the default.
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (which are concatenated together),
> # as well as specifying multiple comma-separated entries in one FontPath
> # command (or a combination of both methods)
> #
> #
>
> FontPath "/usr/share/fonts/misc/"
> FontPath "/usr/share/fonts/TTF/"
> FontPath "/usr/share/fonts/Type1/"
> # FontPath "/usr/share/fonts/CID/"
> FontPath "/usr/share/fonts/100dpi/"
> FontPath "/usr/share/fonts/75dpi/"
> FontPath "/usr/share/fonts/local/"
> # FontPath "/usr/share/fonts/Speedo/"
> # FontPath "/usr/share/fonts/TrueType/"
> # FontPath "/usr/share/fonts/freefont/"
>
> # The module search path. The default path is shown here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> # **********************************************************************
> # Server flags section.
> # **********************************************************************
>
> Section "ServerFlags"
>
> EndSection
>
> # **********************************************************************
> # Input devices
> # **********************************************************************
>
> # **********************************************************************
> # Core keyboard's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>
> Identifier "Keyboard0"
> Driver "kbd"
> Option "AutoRepeat" "500 30"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc101"
> Option "XkbLayout" "us"
>
> EndSection
>
> # **********************************************************************
> # Core Pointer's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "Auto"
> Option "Device" "/dev/mouse"
> EndSection
>
> # **********************************************************************
> # Monitor section
> # **********************************************************************
>
> # Any number of monitor sections may be present
>
> Section "Monitor"
> Identifier "Monitor0"
> HorizSync 31.5 - 82.0
> VertRefresh 40-150
> EndSection
>
> Section "Monitor"
> Identifier "Monitor1"
> VendorName "Monitor Vendor"
> ModelName "27in Analog TV"
> DisplaySize 558 431
> HorizSync 30.0 - 50.0
> VertRefresh 60.0 - 60.0
> Option "dpms"
> EndSection
>
> # **********************************************************************
> # Graphics device section
> # **********************************************************************
>
> # Any number of graphics device sections may be present
>
> # Standard VGA Device:
>
> Section "Device"
> Identifier "Standard VGA"
> VendorName "Unknown"
> BoardName "Unknown"
> Driver "vga"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> VendorName "Chaintech"
> BoardName "nVidia GeForce 5200"
> Option "RenderAccel" "1"
> Option "TVStandard" "NTSC-M"
> Option "TVOutFormat" "Composite"
> Option "ConnectedMonitor" "CRT,TV"
> Option "TwinView" "True"
> Option "MetaModes"
> "800x600,800x600;640x480,640x480;400x300,400x300;320x240,320x240"
> Option "SecondMonitorHorizSync" "30-50"
> Option "SecondMonitorVertRefresh" "60"
> Option "TwinViewOrientation" "Clone"
> Option "Xinerama" "Off"
> Option "NvAGP" "3"
> Option "NoLogo" "1"
> EndSection
>
> # **********************************************************************
> # Screen sections
> # **********************************************************************
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> EndSection
>
> # **********************************************************************
> # ServerLayout sections.
> # **********************************************************************
>
> Section "ServerLayout"
> Identifier "Multihead layout"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> # Next two lines are critical to have monitor and TV
> Option "Xinerama" "off"
> Option "Clone" "on"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Here's the pertinent info from my xorg using a couple year old 27"
analog Panasonic TV via SVideo on a Nvidia FX5200:
Section "Monitor"
Identifier "Panasonic TV"
HorizSync 30-50
VertRefresh 60
DisplaySize 212 154
EndSection
Section "Screen"
Identifier "Screen TV nvidia"
Device "Nvidia FX 5200"
Monitor "Panasonic TV"
DefaultDepth 24
Option "TVStandard" "NTSC-M"
#Option "ConnectedMonitor" "TV"
Option "TVOutFormat" "SVIDEO"
Option "TVOverScan" "0.55"
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Screen "Screen TV nvidia"
-Matt
More information about the mythtv-users
mailing list