[mythtv-users] X and 350

[Claude Gélinas agr.]

Le dimanche 10 juillet 2005 à 14:56 -0700, Marc Maniscalco a écrit :
> Long time read, first time writer.
> 
> I have decided to take the plung since I can no longer
> get DirecTv at my new house.  Mother Nature strikes
> again.
> 
> I am of course following Jarod's instruction. 
> Everything so far works except I can't get X working
> through the 350.  It does capture and pla on the 350's
> output.  I have a geforce MX in the AGP slot running
> to a monitor and then the 350 TV out is pluged in to a
> TV.
you have to edit your xorg.conf to get X via the pvr350 to the tv

Here is my config to do that:


--------------

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name
of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "ca_enhanced"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "NTSC Monitor"
        HorizSync    30.0 - 68.0
        VertRefresh  50.0 - 120.0
        ModeLine     "720x480" 34.6 720 752 840 928 480 484 488 504 -
hsync -vsyn
c
EndSection

Section "Device"

        ### change fb1 to whatever your card grabbed
        ### converted from hex to decimal
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver      "ivtvdev"
        Option      "fbdev" "/dev/fb1"
        Option      "ivtv" "/dev/fb1"
        ### change the BusID to whatever is reported by lspci,
        BusID       "PCI:5:6:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Hauppauge PVR 350 iTVC15 Framebuffer"
        Monitor    "NTSC Monitor"
        DefaultDepth     24
        DefaultFbBPP     32
        SubSection "Display"
                Depth     24
                FbBPP     32
                Modes    "720x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection
--------------------

you will have to run lspci to find your BusID for your card



-----
Claude Gélinas agr., dta
Phyto Ressources inc.
==============================================================================
Varennes, Québec, Canada           Tél.: (450) 652 9764,   Fax.:(450) 652 6182
     Des questions sur les insectes et maladies des plantes ornementales ?
                 Want to know more about ornamental plant pest ?
                            http://www.phyto.qc.ca