[mythtv-users] pcHDTV 3000: Questions from a MythTV newbie
dm at netsol.com.au
Thu Jul 21 22:50:53 EDT 2005
I think you should use the DVB driver, don't worry about testing it with
another program, if it's working myth will recognise it when you select
the right card type in mythtvsetup and allow you to scan for channels.
One tip though, make sure mythbackend is not running when you set the
card up in mythtv, or else it won't be able to scan for channels, the
card will be busy.
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of David Sims
Sent: Friday, 22 July 2005 12:03 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] pcHDTV 3000: Questions from a MythTV newbie
Take a look at this thread:
Sounds like you might have the same problem.
I think the long term answer is to figure out how to use the dvb
drivers. I'm still using the v4l drivers with my hd-3000, because
that's what I got working first and haven't taken the time to get the
dvb drivers working. I've had difficulty like you have with them, but
I honestly haven't spent much time on it.
- David Sims
On Jul 21, 2005, at 10:14 AM, blrogers at ieee.org wrote:
> I've been scanning the archives of this list for
> quite some time now and I had a few questions
> regarding the pcHDTV 3000 and it's compatibility with
> Myth on Fedora Core 3.
> I've compiled the drivers xine-hd (comes with the
> pcHDTV card) and tested HDTV reception and NTSC
> reception. Both work great. I used xine to test the
> HDTV (ATSC) signals and tvtime to test NTSC. I am
> using the v4l drivers, not the DVB drivers for reasons
> I'll discuss in a second.
> When I load the v4l drivers (modprobe cx88_atsc)
> the cx88xx drivers (NTSC) load as well as the ATSC
> drivers. This creates several devices (duh), namely /dev/vbi0,
> /dev/video0, and (I think) /dev/audio0. The ATSC device is created as
> /dev/video1. To get xine to recognize /dev/video1 as the ATSC driver,
> I made a symbolic link to /dev/video1 called /dev/dtv.
> This works great. However, when I try to set up Myth
> to read this card (I am using Myth 0.18.1), the ATSC
> card is not recognized. I can set up NTSC, but if I
> erase all those card settings and try to set up an
> ATSC card, mythsetup just tells me that it couldn't
> find inputs for the device (I know that they are
> there, though, because xine works great). I have
> tried to every possible combination of Global TV
> settings (NTSC with standard TV, ATSC with HDTV, NTSC
> with HDTV, etc), just on a whim that it might work.
> So why am I not using the DVB drivers? When I load
> the pcHDTV DVB drivers (modprobe cx88_dvb), several
> devices are created (/dev/dvb0.dvr0,
> /dev/dvb0.frontend0, etc). However, I don't know how
> to use these devices and none of the programs from
> interpreting DVB seem to recognize or even look for
> these devices. Since, I could test and the v4l
> drivers and confirm that they work, I went that route.
> My system is built on the default FC3 load (kernel
> 2.6.9), one pcHDTV card, nVidia FX 5200, 2.8 GHz HT
> pentium 4, if that helps. I guess my real question is
> what MythTV is looking for to discover the v4l ATSC
> driver and if I should be using DVB drivers, how
> should I configure them? I installed Myth with the
> RPMs available on atrpms (myth-suite package).
> If anyone could clear up the confusion that I'm
> having, that would be great! I would hate to have to
> spend the time to rig up a pseudo-PVR replacement.
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users