[mythtv-users] FC3 LIRC IR Problem
Stephen Roebuck
snroebuck at gmail.com
Sat Jul 23 10:31:05 EDT 2005
Nick,
Thanks for the response, here is a copy of my channel change script:
#!/bin/sh
REMOTE_NAME=SkyDigital
for digit in $(echo $1 | sed -e 's/./& /g'); do
irsend --device=/dev/lircd1 SEND_ONCE $REMOTE_NAME $digit
sleep 0.4 # note, you may have to tweak the interdigit delay up a bit
done
irsend --device=/dev/lircd1 SEND_ONCE $REMOTE_NAME Select
~
Any light you can shed on the problem would be great, I'm really stuck on
this final problem
Cheers
Steve
> On 7/21/05, Nick <knowledgejunkie at gmail.com> wrote:
> >
> > On 7/21/05, Stephen Roebuck <snroebuck at gmail.com> wrote:
> > > Hi,
> > >
> > > I'm having problems getting my IR blaster to work, I have followed the
> > very
> > > good instructions at
> > > http://www.lircsetup.com/lirc/blaster/index.php to setup my
> > > mythtv box to control my SKY TV box (Thomson DSI4212). I'm using FC3
> > and
> > > running mythtv18.1 on a pundit-r using a PVR250 (setup using Jarod's
> > > excellent guide). I have everything else working including the the
> > remote
> > > for mythtv but I can't get the IR blaster to change channel! The red
> > LED
> > > flashes when I try to change channel so I know it is on the correct
> > COM port
> > > but I get this output:
> > >
> > > [root at localhost ~]# /usr/local/bin/change_chan.sh 120
> > > /usr/local/bin/change_chan.sh: line 8: /root: is a directory
> >
> > Steve,
> >
> > Do you want to post your channel change script - it should only have 7
> > lines if you're using the one from lircsetup.com <http://lircsetup.com>.
> >
> > Nick
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20050723/d4bd3923/attachment.htm
More information about the mythtv-users
mailing list