[mythtv-users] Switching to PAL problem

[Dan H Orlic]

I am extremely new to mythtv but I am pretty sure that I do not want
my card switching to PAL if I live in the US... which I do.  Any idea
why this is?  thanks for any help


my set_ivtv_params:

/usr/local/bin/ivtvctl -d /dev/video0 -u 0x3000 -f width=720,height=480
-p 6
/usr/local/bin/ivtvctl -d /dev/video0 -c
dnr_mode=0,dnr_temporal=4,dnr_spatial=4
/usr/local/bin/ivtvctl -d /dev/video0 -x 0

/usr/local/bin/ivtvctl -d /dev/video1 -u 0x3000 -f width=720,height=480
-p 6
/usr/local/bin/ivtvctl -d /dev/video1 -c
dnr_mode=0,dnr_temporal=4,dnr_spatial=4
/usr/local/bin/ivtvctl -d /dev/video1 -x 0

--------------------------------------------------------------------------

My dmesg output (Snippet):

ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x00892598, Revision 0x00000001
ivtv: Radio detected
cx25840: Unknown parameter `no_black_magic'
ivtv: Failed to load module cx25840
wm8775: Unknown parameter `mixer'
ivtv: Failed to load module wm8775
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 128 16384 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1 using 80 25920 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 165 12635 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Setting Tuner 47
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: i2c client addr: 0x44 not found for command 1074029572!
ivtv: i2c client addr: 0x44 not found for command 1074029678!
ivtv: Switching standard to PAL.
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 4608, itv = 0xe0c1b6e8
ivtv: ivtv_enc_vbi_thread: pid = 4609, itv = 0xe0c1b6e8