[mythtv-users] PVR-500 replacing WinTV, randomly rebooting
smmg at nukitel.com
Fri Jun 3 19:34:57 UTC 2005
On Tue, 2005-05-31 at 16:07 -0600, Marty Mastera wrote:
> I have been running Myth 0.17 on a Soyo K7VME mobo and a WinTV PCI
> card. This system is normally only used as a backend for an xbox
> frontend. I recently replaced the WinTV card with a PVR-500MCE. All
> I did was remove the WinTV card and replace it with the PVR-500 card,
> then followed instructions to download ivtv 0.3.2s and configure it.
> I then removed the WinTV card from mythsetup and added two capture
> cards, one for each tuner on the 500. All of the functionality is
> working good (ie I can watch live tv, record two shows at once, etc,
> etc) but the machine randomly reboots itself every so often. It only
> seems to happen when one or more of the tuners are in use (ie during
> live TV) and seems to possibly happen more quickly if I change
> channels alot. In general the audio is working great but it seems
> like on certain channels (or possibly on every channel but only right
> before it decides to reboot) I notice some slight audio distortion I
> have heard of people having trouble with VIA chipsets, but I have read
> posts where people have had success with the KM400 chipset. I have
> tried the PVR-500 in a different slot, installed the newest BIOS,
> verifed that the reboots will occur whether or not the xbox is
> involved, tried to make sure things are using unique IRQs, etc...here
> are a couple of questions:
> 1) Can anyone tell me which modules should be loaded and running for a
> PVR-500? I'm wondering if the sytem is still loading modules for the
> old WinTV card...I see references to bttv in the dmesg output.
> 2) Is anyone else using this motherboard with a PVR-150 or PVR-500?
> If so what are your experiences
> 3) Besides adding the new tuner cards and mapping sources, etc...in
> the mythsetup, is there anything on the backend that I would have
> needed to switch after I install this card?
> mythtv-users mailing list
> mythtv-users at mythtv.org
I suppose you may be right on the VIA chipset thing. I haven't read
anything about that yet, but I also have a VIA chipset (KT133A) although
on a different board and my system reboots with one or two PVR500-MCE.
Works fine with just a PVR350.
I have tried ivtv 0.3.5f, 0.3.5s and 0.2.0-rc3j (0.2.0-rc3j has the
PVR500-MCE support backported to it), all of them cause a reboot even
when I am capturing video with
cat /dev/video0 > /tmp/asd0.mpg
No MythTV is needed for these random reboots to occur.
At least once, the machine rebooted just by having the modules loaded,
no capture involved.
I haven't tried these cards in Windows, so I don't know if they cause a
reboot or not. If they don't, then maybe there is a software workaround
for this issue.
More information about the mythtv-users